bodylove 25ba5741f4 - Stripped trailing spaces (patch preparation) ...

git-svn-id: svn://svn.berlios.de/openocd/trunk@225 b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-10 18:47:26 +00:00

..

at91sam7.c

- Support for AT91SAM7xx512 chips

2007-08-20 11:51:12 +00:00

at91sam7.h

- Support for AT91SAM7xx512 chips

2007-08-20 11:43:07 +00:00

cfi.c

- Stripped trailing spaces (patch preparation)

2007-12-10 18:47:26 +00:00

cfi.h

- Stripped trailing spaces (patch preparation)

2007-12-10 18:47:26 +00:00

flash.c

- added patch to display device information as INFO too

2007-12-09 15:36:21 +00:00

flash.h

- flash autoerase <on|off> cmd added, default is off - flash banks are calculated and erased prior to write (flash write_image only)

2007-10-01 08:31:30 +00:00

lpc2000.c

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00

lpc2000.h

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00

lpc3180_nand_controller.c

- correctly mask out bits that aren't part of a copied buffer

2007-04-12 13:27:23 +00:00

lpc3180_nand_controller.h

- reworked file i/o. every fileaccess (target, flash, nand, in future configuration, too) should now go through the fileio subsystem

2007-03-15 13:36:44 +00:00

Makefile.am

- Added PKGLIBDIR define to C options. Allows to store

2007-12-10 18:34:40 +00:00

nand.c

- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to

2007-08-14 09:48:54 +00:00

nand.h

- fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)

2007-03-26 21:47:26 +00:00

non_cfi.c

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00

non_cfi.h

- split fileio handling into fileio part and image handling

2007-05-29 11:23:42 +00:00

stellaris.c

- Fixed display of sector sizes in flash.c

2007-09-10 17:43:08 +00:00

stellaris.h

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00

stm32x.c

- reset_run now works as expected on cortex-m3

2007-11-21 16:37:17 +00:00

stm32x.h

- reset_run now works as expected on cortex-m3

2007-11-21 16:37:17 +00:00

str7x.c

- cleaned up str7, str9 and stm32 flash drivers

2007-10-08 13:12:39 +00:00

str7x.h

- cleaned up str7, str9 and stm32 flash drivers

2007-10-08 13:12:39 +00:00

str9x.c

- corrected str91x bank1 programming issues

2007-10-26 09:05:57 +00:00

str9x.h

- corrected str91x bank1 programming issues

2007-10-26 09:05:57 +00:00

str9xpec.c

- reset_run now works as expected on cortex-m3

2007-11-21 16:37:17 +00:00

str9xpec.h

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00