Matthias Welwarsky 03942f867a adi_v5_jtag: clear sticky overrun condition in WAIT timeout ...

If WAIT recovery fails (times out), an ABORT command is issued to the
DAP but under some conditions the SSTICKYORUN bit in CTRL/STAT is not
cleared as well, which renders the DP unusable. This happens when
trying to access e.g. the ROM table of powered-down cores, on many
targets.

Change-Id: Id0a7ba6180069eee562871314f520f938df9718f
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/3476
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-08-09 14:36:13 +01:00

..

flash

flash: nor: mdr: fix verification problem with 1986VE1T or 1986VE3T

2016-08-02 17:49:18 +01:00

helper

Fix usage of timeval_ms()

2016-07-19 10:45:16 +01:00

jtag

Fix usage of timeval_ms()

2016-07-19 10:45:16 +01:00

pld

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

rtos

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

server

server: support binding to arbitrary interfaces

2016-07-17 20:55:11 +01:00

svf

Fix usage of timeval_ms()

2016-07-19 10:45:16 +01:00

target

adi_v5_jtag: clear sticky overrun condition in WAIT timeout

2016-08-09 14:36:13 +01:00

transport

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

xsvf

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

hello.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

hello.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

main.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

Makefile.am

Makefile.am: link libusb-1.0 after libusb-0.1 to fix dependencies

2015-02-04 21:56:45 +00:00

openocd.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

openocd.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00