Paul Fertser 64d02ccf82 jtag/drivers/ftdi: declare standard JTAG signals on SWD init ...

Unfortunately, this means they're available for config files only
after selecting swd transport.

Change-Id: Ia2afc1f3bfdba8d81efbb8ab964b174c0f7e2811
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2182
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-06-28 09:36:17 +00:00

..

flash

flash: samd: add SAMD10 and SAMD11 part IDs

2014-06-22 08:47:49 +00:00

helper

swd: Improve parity calculation and move it to types.h

2014-06-28 09:27:19 +00:00

jtag

jtag/drivers/ftdi: declare standard JTAG signals on SWD init

2014-06-28 09:36:17 +00:00

pld

update files to correct FSF address

2013-06-05 19:52:42 +00:00

rtos

Don't cast return value of [cm]alloc

2014-03-30 03:53:45 +00:00

server

openrisc: add support for JTAG Serial Port

2014-06-22 08:39:08 +00:00

svf

svf: Only read TDO back from the device if we actually need to look at the bits.

2014-06-22 08:32:13 +00:00

target

Relax polling check if not in JTAG mode

2014-06-28 09:34:55 +00:00

transport

transport: Constify the transports vector

2014-06-28 09:33:31 +00:00

xsvf

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.h

update files to correct FSF address

2013-06-05 19:52:42 +00:00

main.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

Makefile.am

Makefile.am: fix build for libftdi1, pass CFLAGS where appropriate

2014-04-14 18:09:40 +00:00

openocd.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

openocd.h

update files to correct FSF address

2013-06-05 19:52:42 +00:00