Tim Newsome c3b90c052a flash/nor: use target_addr_t for flash bank base ...

This should allow users to configure flash at >32-bit addresses.

Change-Id: I7c9d3c5762579011a2d9708e5317e5765349845c
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4919
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

2019-03-08 14:05:35 +00:00

..

flash

flash/nor: use target_addr_t for flash bank base

2019-03-08 14:05:35 +00:00

helper

helper/command: return proper JIM error code

2019-03-06 15:38:07 +00:00

jtag

drivers/stlink_usb: use command STLINK_DEBUG_APIV2_READ_IDCODES

2019-03-08 07:06:28 +00:00

pld

Convert to non-recursive make

2016-12-08 16:23:10 +00:00

rtos

rtos/hwthread: add hardware-thread pseudo rtos

2019-03-08 12:54:47 +00:00

server

gdb_server, target: Add target_address_bits()

2019-03-08 14:05:19 +00:00

svf

svf: improve robustness when processing invalid SVF files

2018-03-13 08:41:21 +00:00

target

gdb_server, target: Add target_address_bits()

2019-03-08 14:05:19 +00:00

transport

configure: disable all drivers when zy1000 is enabled

2018-04-09 09:04:46 +01:00

xsvf

Convert to non-recursive make

2016-12-08 16:23:10 +00:00

hello.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

hello.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

main.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

Makefile.am

Convert to non-recursive make

2016-12-08 16:23:10 +00:00

openocd.c

armv8: valgrind memleak fixes

2018-04-10 09:13:02 +01:00

openocd.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00