Ian Thompson 61d0757acf target/xtensa: invalidate register cache on reset ...

Resolves issues where registers are accessed when poll() logic is inactive or has not yet been triggered.

Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: If7a4d00938fb188b008325249627f7773c3484c5
Reviewed-on: https://review.openocd.org/c/openocd/+/7197
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

2022-09-18 08:12:02 +00:00

..

flash

flash/nor/stm32lx: Add revision 'X' for Cat.4/3 devices

2022-09-17 21:16:48 +00:00

helper

openocd: fix for polling during "expr" computation

2022-09-13 22:14:28 +00:00

jtag

drivers/bcm2835gpio: Fully restore GPIOs after use

2022-09-13 22:17:41 +00:00

pld

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

rtos

rtos: Support looking up .lto_priv.0 appended to symbol name

2022-09-17 20:58:55 +00:00

rtt

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

server

server: add function to get openocd shutdown status

2022-09-03 21:28:11 +00:00

svf

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

target

target/xtensa: invalidate register cache on reset

2022-09-18 08:12:02 +00:00

transport

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

xsvf

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

hello.c

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

hello.h

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

main.c

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00

Makefile.am

openocd: build: add SPDX tag

2022-07-23 13:06:38 +00:00

openocd.c

openocd: prevent target polling during 'init'

2022-08-15 13:22:18 +00:00

openocd.h

openocd: src: replace the GPL-2.0-or-later license tag

2022-07-23 13:59:13 +00:00