forked from auracaster/openocd
4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
21 lines
631 B
INI
21 lines
631 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#
|
|
# Generic LPC1850 board w/ SPIFI flash.
|
|
# This config file is intended as an example of how to
|
|
# use the lpcspifi flash driver, but it should be functional
|
|
# for most LPC1850 boards utilizing SPIFI flash.
|
|
|
|
set CHIPNAME lpc1850
|
|
|
|
source [find target/lpc1850.cfg]
|
|
|
|
#A large working area greatly reduces flash write times
|
|
set _WORKAREASIZE 0x4000
|
|
|
|
$_CHIPNAME.m3 configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
|
|
|
|
#Configure the flash bank; 0x14000000 is the base address for
|
|
#lpc43xx/lpc18xx family micros.
|
|
flash bank SPIFI_FLASH lpcspifi 0x14000000 0 0 0 $_CHIPNAME.m3
|