Paul Fertser fb5e099af8 jtag/drivers/stlink: allow to reconnect seamlessly after polling failure ...

If the communication with the target was failing (either because of an
intermittent connection or the target was rebooted), this is needed to
reestablish operational state.

Reported-by: Tim Sander <tim@krieglstein.org>
Tested-by: Tim Sander <tim@krieglstein.org>
Change-Id: I91ea2e2b2b5ef8eb27dfe9bae95ef2a919f67e4e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2152
Tested-by: jenkins
Reviewed-by: Tim Sander <tim@krieglstein.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2014-06-01 17:28:49 +00:00

..

flash

flash/nor/stm32f1x: add support for F04x parts

2014-05-31 12:05:25 +00:00

helper

Update to the current Jim Tcl

2014-05-09 20:12:17 +00:00

jtag

jtag/drivers/stlink: allow to reconnect seamlessly after polling failure

2014-06-01 17:28:49 +00:00

pld

update files to correct FSF address

2013-06-05 19:52:42 +00:00

rtos

Don't cast return value of [cm]alloc

2014-03-30 03:53:45 +00:00

server

server: fix confusing wording for incoming tcp connections

2014-05-31 12:04:31 +00:00

svf

svf: Fix debug and error messages that print hex buffer

2014-05-05 20:25:10 +00:00

target

target: reexamine after polling succeeds again

2014-06-01 17:28:18 +00:00

transport

Don't cast return value of [cm]alloc

2014-03-30 03:53:45 +00:00

xsvf

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.h

update files to correct FSF address

2013-06-05 19:52:42 +00:00

main.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

Makefile.am

Makefile.am: fix build for libftdi1, pass CFLAGS where appropriate

2014-04-14 18:09:40 +00:00

openocd.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

openocd.h

update files to correct FSF address

2013-06-05 19:52:42 +00:00