diff --git a/bl54l15_radio1.overlay b/bl54l15_radio1.overlay
new file mode 100644
index 0000000..512fe77
--- /dev/null
+++ b/bl54l15_radio1.overlay
@@ -0,0 +1,44 @@
+&uart20 {
+    compatible = "nordic,nrf-uarte";
+    status = "okay";
+    current-speed = <1000000>;
+    hw-flow-control;
+};
+
+
+&pinctrl {
+	uart20_default: uart20_default {
+		group1 {
+			psels = <NRF_PSEL(UART_TX, 1, 6)>,
+				<NRF_PSEL(UART_RTS, 1, 7)>;
+		};
+		group2 {
+			psels = <NRF_PSEL(UART_RX, 1, 4)>,
+				<NRF_PSEL(UART_CTS, 1, 5)>;
+			bias-pull-up;
+		};
+	};
+
+	uart20_sleep: uart20_sleep {
+		group1 {
+			psels = <NRF_PSEL(UART_TX, 1, 6)>,
+				<NRF_PSEL(UART_RX, 1, 4)>,
+				<NRF_PSEL(UART_RTS, 1, 7)>,
+				<NRF_PSEL(UART_CTS, 1, 5)>;
+			low-power-enable;
+		};
+	};
+};
+
+/ {
+	chosen {
+        zephyr,console = &uart20;
+		zephyr,shell-uart = &uart20;
+		//zephyr,uart-mcumgr = &uart0;
+		//zephyr,bt-mon-uart = &uart0;
+		//zephyr,bt-c2h-uart = &uart0;
+	};
+};
+&power {
+    status = "okay";
+};
\ No newline at end of file
diff --git a/bl654pa_gpio_uart.overlay b/bl654pa_gpio_uart.overlay
index b1ea5fd..47337a6 100644
--- a/bl654pa_gpio_uart.overlay
+++ b/bl654pa_gpio_uart.overlay
@@ -1,7 +1,7 @@
 &uart0 {
     compatible = "nordic,nrf-uarte";
     status = "okay";
-    current-speed = <1000000>; //<115200>;
+    current-speed = <115200>; //<115200>;
     hw-flow-control;
 };
 
@@ -43,3 +43,11 @@
 &power {
     status = "okay";
 };
+
+&led0_green {
+    gpios = <&gpio0 0 0>;
+};
+
+&led1_red {
+    gpios = <&gpio0 1 0>;
+};
diff --git a/nrf52840_gpio_uart.overlay b/nrf52840_gpio_uart.overlay
new file mode 100644
index 0000000..16c7bc8
--- /dev/null
+++ b/nrf52840_gpio_uart.overlay
@@ -0,0 +1,18 @@
+&uart0 {
+    compatible = "nordic,nrf-uarte";
+    status = "okay";
+    current-speed = <1000000>;
+    hw-flow-control;
+};
+
+
+/ {
+	chosen {
+        zephyr,console = &uart0;
+		zephyr,shell-uart = &uart0;
+		zephyr,log-uart = &uart0;
+		// zephyr,uart-mcumgr = &uart0;
+		// zephyr,bt-mon-uart = &uart0;
+		//zephyr,bt-c2h-uart = &uart0; // make uart0 the hci interfac
+	};
+};
\ No newline at end of file