add BLE controller firmware for nRF53

2025-01-12 16:00:06 +01:00
parent 5a29c2673b
commit e5ba15b023
2 changed files with 16323 additions and 0 deletions
--- a/controller/README.txt
+++ b/controller/README.txt
@@ -0,0 +1,22 @@
+### Introduction ###
+The following firmware binaries allow to use the nRF5340-DK as a HCI UART Controller 5.2+ with enabled 
+Flow Control. 
+
+### Programming ###
+Before using the nRF53 programm nRF53DK_hci_uart.hex on the board (e.g. using nRF Connect for Desktop):
+
+
+### UART Configuration ###
+In order to use UART with Flow Control enabled the FLOW CONTROL switches for VCOM0 and VCOM1 must the set to OFF.
+
+The UART runs with following configuration:
+
+- BAUDRATE = 1000000 
+- FLOWCONTROL = enabled
+- DATA = 8 bits
+- STOP = 1 bit
+- PARITY = None
+
+When the DK is connected to the PC via USB two VCOM Ports are created (e.g. COM5 and COM6).
+Please use com port with the lower number.
+
--- a/controller/nRF53dk_hci_uart.hex
+++ b/controller/nRF53dk_hci_uart.hex