Prepare 0.9.1

* Use `pcmtype` keyword for range

Update methods that accept a `direction` argument (i.e.
capture/playback) to get this via positional _or_ keyword arguments.

Code using keyword arguments can be more robust; however the main reason
for this change is to prepare the way for an extra `units` argument to
many of these methods.

Update documentation to consistently use `pcmtype` instead of
a mixture of that and `direction`.

* Support units

.gitignore

@@ -4,6 +4,11 @@ MANIFEST
 doc/gh-pages/
 doc/html/
 doc/doctrees/
+doc/_build/
 gh-pages/
 build/
-dist/
+dist/
+.vscode/
+/__pycache__/
+/pyalsaaudio.egg-info/
+*.raw

CHANGES

@@ -1,67 +0,0 @@
-Version 0.8.1:
-- document changes (this file)
-
-Version 0.8:
-- 'PCM()' has new 'device' and 'cardindex' keyword arguments.
-
-  The keyword 'device' allows to select virtual devices, 'cardindex' can be
-  used to select hardware cards by index (as with 'mixers()' and 'Mixer()').
-
-  The 'card' keyword argument is still supported, but deprecated.
-
-  The reason for this change is that the 'card' keyword argument guessed
-  a device name from the card name, but this only works sometimes, and breaks
-  opening virtual devices.
-
-- new function 'pcms()' to list available PCM devices.
-
-- mixers() and Mixer() take an additional 'device' keyword argument.
-  This allows to list or open virtual devices.
-
-- The default behaviour of Mixer() without any arguments has changed.
-  Now Mixer() will try to open the 'default' Mixer instead of the Mixer
-  that is associated with card 0.
-
-- fix a memory leak under Python 3.x
-
-- some more memory leaks in error conditions fixed.
-
-Version 0.7:
-- fixed several memory leaks (patch 3372909), contributed by Erik Kulyk)
-
-
-Version 0.6:
-- mostly reverted patch 2594366: alsapcm_setup did not do complete error
-checking for good reasons; some ALSA functions in alsapcm_setup may fail without
-rendering the device unusable
-
-
-Version 0.5:
-- applied patch 2777035: Fixed setrec method in alsaaudio.c
-  This included a mixertest with more features
-- fixed/applied patch 2594366: alsapcm_setup does not do any error checking
-
-
-Version 0.4:
-- API changes: mixers() and Mixer() now take a card index instead of a
-  card name as optional parameter.
-- Support for Python 3.0
-- Documentation converted to reStructuredText; use Sphinx instead of LaTeX.
-- added cards()
-- added PCM.close()
-- added Mixer.close()
-- added mixer.getenum()
-
-
-Version 0.3:
-- wrapped blocking calls with Py_BEGIN_ALLOW_THREADS/Py_END_ALLOW_THREADS
-- added pause
-
-
-Version 0.2:
-- Many bugfixes related to playback in particular
-- Module documentation in the doc subdirectory
-
-
-Version 0.1:
-- Initial version

CHANGES.md

@@ -0,0 +1,100 @@
+# Version 0.9.1:
+- Support decibel, percentage, and raw volumes in getvolume, setvolume, and getrange (#109 from @chrisdiamand):
+
+# Version 0.9.0:
+- Added keyword arguments for channels, format, rate and periodsize
+- Deprecated `setchannel`, `setformat`, `setrate` and `setperiodsize`
+
+# Version 0.8.6:
+- Added four methods to the `PCM` class to allow users to get detailed information about the device:
+
+  - `getformats()` returns a dictionary of name / value pairs, one for each of the card's
+    supported formats - e.g. `{"U8": 1, "S16_LE": 2}`,
+  - `getchannels()` returns a list of the supported channel numbers, e.g. `[1, 2]`,
+  - `getrates()` returns supported sample rates for the device, e.g. `[48000]`,
+  - `getratebounds()` returns the device's official minimum and maximum supported 
+    sample rates as a tuple, e.g. `(4000, 48000)`.
+  
+  (#82 contributed by @jdstmporter)
+
+- Prevent hang on close after capturing audio (#80 contributed by @daym)
+
+# Version 0.8.5:
+- Return an empty string/bytestring when `read()` detects an 
+  overrun. Previously the returned data was undefined (contributed by @jcea)
+
+- Unlimited setperiod buffer size when reading frames (contributed by @jcea)
+
+# Version 0.8.4:
+- Fix Python3 API usage broken in 0.8.3
+
+# Version 0.8.3:
+- Add DSD sample formats (contributed by @lintweaker)
+- Add Mixer.handleevents() to acknowledge events identified by select.poll (contributed by @PaulSD)
+- Add functions for listing cards and their names (contributed by @chrisdiamand)
+- Add a method for setting enums (contributed by @chrisdiamand)
+
+# Version 0.8.2:
+- fix #3 (we cannot get the revision from git for pip installs)
+
+# Version 0.8.1:
+- document changes (this file)
+
+# Version 0.8:
+- `PCM()` has new `device` and `cardindex` keyword arguments.
+
+  The keyword `device` allows to select virtual devices, `cardindex` can be
+  used to select hardware cards by index (as with `mixers()` and `Mixer()`).
+
+  The `card` keyword argument is still supported, but deprecated.
+
+  The reason for this change is that the `card` keyword argument guessed
+  a device name from the card name, but this only works sometimes, and breaks
+  opening virtual devices.
+
+- new function `pcms()` to list available PCM devices.
+
+- `mixers()` and `Mixer()` take an additional `device` keyword argument.
+  This allows to list or open virtual devices.
+
+- The default behaviour of `Mixer()` without any arguments has changed.
+  Now Mixer() will try to open the `default` Mixer instead of the Mixer
+  that is associated with card 0.
+
+- fix a memory leak under Python 3.x
+
+- some more memory leaks in error conditions fixed.
+
+# Version 0.7:
+- fixed several memory leaks (patch 3372909), contributed by Erik Kulyk)
+
+# Version 0.6:
+- mostly reverted patch 2594366: alsapcm_setup did not do complete error
+checking for good reasons; some ALSA functions in alsapcm_setup may fail without
+rendering the device unusable
+
+# Version 0.5:
+- applied patch 2777035: Fixed setrec method in alsaaudio.c
+  This included a mixertest with more features
+- fixed/applied patch 2594366: alsapcm_setup does not do any error checking
+
+# Version 0.4:
+- API changes: mixers() and Mixer() now take a card index instead of a
+  card name as optional parameter.
+- Support for Python 3.0
+- Documentation converted to reStructuredText; use Sphinx instead of LaTeX.
+- added `cards()`
+- added `PCM.close()`
+- added `Mixer.close()`
+- added `mixer.getenum()`
+
+# Version 0.3:
+- wrapped blocking calls with `Py_BEGIN_ALLOW_THREADS`/`Py_END_ALLOW_THREADS`
+- added pause
+
+# Version 0.2:
+- Many bugfixes related to playback in particular
+- Module documentation in the doc subdirectory
+
+# Version 0.1:
+- Initial version

doc/README.md

@@ -1,3 +1,26 @@
+# Make a new release
+
+Update the version in setup.py
+
+    pyalsa_version = '0.9.0'
+
+Commit and push the update.
+
+Create and push a tag naming the version (i.e. 0.9.0):
+
+    git tag 0.9.0
+    git push origin 0.9.0
+
+Create the package:
+
+    python3 setup.py sdist
+
+Upload the package
+
+    twine upload dist/*
+
+Don't forget to update the documentation.
+
 # Publish the documentation
 
 The documentation is published through the `gh-pages` branch.

doc/conf.py

@@ -1,182 +1,160 @@
 # -*- coding: utf-8 -*-
 #
-# alsaaudio documentation build configuration file, created by
-# sphinx-quickstart on Sat Nov 22 00:17:09 2008.
+# alsaaudio documentation documentation build configuration file, created by
+# sphinx-quickstart on Thu Mar 30 23:52:21 2017.
 #
-# This file is execfile()d with the current directory set to its containing dir.
+# This file is execfile()d with the current directory set to its
+# containing dir.
 #
-# The contents of this file are pickled, so don't put values in the namespace
-# that aren't pickleable (module imports are okay, they're removed automatically).
+# Note that not all possible configuration values are present in this
+# autogenerated file.
 #
-# All configuration values have a default value; values that are commented out
-# serve to show the default value.
+# All configuration values have a default; values that are commented out
+# serve to show the default.
 
-import sys, os
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
 
-sys.path.append('..')
+import sys
+sys.path.insert(0, '..')
 from setup import pyalsa_version
 
-# If your extensions are in another directory, add it here. If the directory
-# is relative to the documentation root, use os.path.abspath to make it
-# absolute, like shown here.
-#sys.path.append(os.path.abspath('some/directory'))
 
-# General configuration
-# ---------------------
+# -- General configuration ------------------------------------------------
 
-# Add any Sphinx extension module names here, as strings. They can be extensions
-# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
 extensions = []
 
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ['.templates']
+templates_path = ['_templates']
 
-# The suffix of source filenames.
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
 source_suffix = '.rst'
 
 # The master toctree document.
 master_doc = 'index'
 
-# General substitutions.
-project = u'alsaaudio'
-copyright = u'2008-2009, Casper Wilstrup, Lars Immisch'
+# General information about the project.
+project = u'alsaaudio documentation'
+copyright = u'2017, Lars Immisch & Casper Wilstrup'
+author = u'Lars Immisch & Casper Wilstrup'
 
-# The default replacements for |version| and |release|, also used in various
-# other places throughout the built documents.
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
 #
 # The short X.Y version.
 version = pyalsa_version
 # The full version, including alpha/beta/rc tags.
-release = pyalsa_version
+release = version
 
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-today_fmt = '%B %d, %Y'
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
 
-# List of documents that shouldn't be included in the build.
-#unused_docs = []
-
-# List of directories, relative to source directories, that shouldn't be searched
-# for source files.
-exclude_trees = ['.build']
-
-# The reST default role (used for this markup: `text`) to use for all documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
 
 # The name of the Pygments (syntax highlighting) style to use.
 pygments_style = 'sphinx'
 
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
 
-# Options for HTML output
-# -----------------------
 
-# The style sheet to use for HTML and HTML Help pages. A file of that name
-# must exist either in Sphinx' static/ path, or in one of the custom paths
-# given in html_static_path.
-html_style = 'default.css'
+# -- Options for HTML output ----------------------------------------------
 
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
 
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['static']
+html_static_path = ['_static']
 
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-html_last_updated_fmt = '%b %d, %Y'
 
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_use_modindex = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, the reST sources are included in the HTML build as _sources/<name>.
-#html_copy_source = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# If nonempty, this is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = ''
+# -- Options for HTMLHelp output ------------------------------------------
 
 # Output file base name for HTML help builder.
-htmlhelp_basename = 'alsaaudiodoc'
+htmlhelp_basename = 'alsaaudiodocumentationdoc'
 
 
-# Options for LaTeX output
-# ------------------------
+# -- Options for LaTeX output ---------------------------------------------
 
-# The paper size ('letter' or 'a4').
-#latex_paper_size = 'letter'
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
 
-# The font size ('10pt', '11pt' or '12pt').
-#latex_font_size = '10pt'
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
 
 # Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title, author, document class [howto/manual]).
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-  ('index', 'alsaaudio.tex', u'alsaaudio Documentation',
-   u'Casper Wilstrup, Lars Immisch', 'manual'),
+    (master_doc, 'alsaaudiodocumentation.tex', u'alsaaudio documentation Documentation',
+     u'Lars Immisch', 'manual'),
 ]
 
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
 
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'alsaaudiodocumentation', u'alsaaudio documentation Documentation',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'alsaaudiodocumentation', u'alsaaudio documentation Documentation',
+     author, 'alsaaudiodocumentation', 'One line description of project.',
+     'Miscellaneous'),
+]
 
-# Additional stuff for the LaTeX preamble.
-#latex_preamble = ''
 
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
 
-# If false, no module index is generated.
-#latex_use_modindex = True

doc/index.rst

@@ -1,22 +1,32 @@
+.. alsaaudio documentation documentation master file, created by
+   sphinx-quickstart on Thu Mar 30 23:52:21 2017.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
 alsaaudio documentation
-=======================
+===================================================
 
 .. toctree::
    :maxdepth: 2
+   :caption: Contents:
 
    pyalsaaudio
    terminology
    libalsaaudio
 
+Download
+========
 
-Github pages
-=================
-
-* `Project page <https://github.com/larsimmisch/pyalsaaudio/>`_
 * `Download from pypi <https://pypi.python.org/pypi/pyalsaaudio>`_
+  
+      
+Github
+======
+
+* `Repository <https://github.com/larsimmisch/pyalsaaudio/>`_
 * `Bug tracker <https://github.com/larsimmisch/pyalsaaudio/issues>`_
 
-
+ 
 Indices and tables
 ==================
 
@@ -24,3 +34,5 @@ Indices and tables
 * :ref:`modindex`
 * :ref:`search`
 
+    
+  

doc/libalsaaudio.rst

@@ -33,13 +33,13 @@ The :mod:`alsaaudio` module defines functions and classes for using ALSA.
 .. % should be enclosed in \var{...}.
 
 
-.. function:: pcms([type=PCM_PLAYBACK])
+.. function:: pcms(pcmtype=PCM_PLAYBACK)
 
    List available PCM devices by name.
    
    Arguments are:
 
-   * *type* - can be either :const:`PCM_CAPTURE` or :const:`PCM_PLAYBACK`
+   * *pcmtype* - can be either :const:`PCM_CAPTURE` or :const:`PCM_PLAYBACK`
      (default).  
 
    **Note:**
@@ -63,7 +63,6 @@ The :mod:`alsaaudio` module defines functions and classes for using ALSA.
    useful. If you want to see a list of available PCM devices, use :func:`pcms`
    instead.
    
-
 .. function:: mixers(cardindex=-1, device='default')
 
    List the available mixers. The arguments are:
@@ -98,6 +97,9 @@ The :mod:`alsaaudio` module defines functions and classes for using ALSA.
      changed. Since 0.8, this functions returns the mixers for the default
      device, not the mixers for the first card.
 
+.. function:: asoundlib_version()
+
+   Return a Python string containing the ALSA version found.
 
 .. _pcm-objects:
 
@@ -108,7 +110,7 @@ PCM objects in :mod:`alsaaudio` can play or capture (record) PCM
 sound through speakers or a microphone. The PCM constructor takes the
 following arguments:
 
-.. class:: PCM(type=PCM_PLAYBACK, mode=PCM_NORMAL, device='default', cardindex=-1)
+.. class:: PCM(type=PCM_PLAYBACK, mode=PCM_NORMAL, rate=44100, channels=2, format=PCM_FORMAT_S16_LE, periodsize=32, device='default', cardindex=-1)
 
    This class is used to represent a PCM device (either for playback and
    recording). The arguments are:
@@ -117,6 +119,44 @@ following arguments:
      (default).  
    * *mode* - can be either :const:`PCM_NONBLOCK`, or :const:`PCM_NORMAL`
      (default). 
+   * *rate* - the sampling rate in Hz. Typical values are ``8000`` (mainly used for telephony), ``16000``, ``44100`` (default), ``48000`` and ``96000``.
+   * *channels* - the number of channels. The default value is 2 (stereo).
+   * *format* - the data format. This controls how the PCM device interprets data for playback, and how data is encoded in captures. 
+     The default value is :const:`PCM_FORMAT_S16_LE`.
+   
+   =========================  ===============
+        Format                Description
+   =========================  ===============
+   ``PCM_FORMAT_S8``          Signed 8 bit samples for each channel
+   ``PCM_FORMAT_U8``          Signed 8 bit samples for each channel
+   ``PCM_FORMAT_S16_LE``      Signed 16 bit samples for each channel Little Endian byte order)
+   ``PCM_FORMAT_S16_BE``      Signed 16 bit samples for each channel (Big Endian byte order)
+   ``PCM_FORMAT_U16_LE``      Unsigned 16 bit samples for each channel (Little Endian byte order)
+   ``PCM_FORMAT_U16_BE``      Unsigned 16 bit samples for each channel (Big Endian byte order)
+   ``PCM_FORMAT_S24_LE``      Signed 24 bit samples for each channel (Little Endian byte order in 4 bytes)
+   ``PCM_FORMAT_S24_BE``      Signed 24 bit samples for each channel (Big Endian byte order in 4 bytes)
+   ``PCM_FORMAT_U24_LE``      Unsigned 24 bit samples for each channel (Little Endian byte order in 4 bytes)
+   ``PCM_FORMAT_U24_BE``      Unsigned 24 bit samples for each channel (Big Endian byte order in 4 bytes)
+   ``PCM_FORMAT_S32_LE``      Signed 32 bit samples for each channel (Little Endian byte order)
+   ``PCM_FORMAT_S32_BE``      Signed 32 bit samples for each channel (Big Endian byte order)
+   ``PCM_FORMAT_U32_LE``      Unsigned 32 bit samples for each channel (Little Endian byte order)
+   ``PCM_FORMAT_U32_BE``      Unsigned 32 bit samples for each channel (Big Endian byte order)
+   ``PCM_FORMAT_FLOAT_LE``    32 bit samples encoded as float (Little Endian byte order)
+   ``PCM_FORMAT_FLOAT_BE``    32 bit samples encoded as float (Big Endian byte order)
+   ``PCM_FORMAT_FLOAT64_LE``  64 bit samples encoded as float (Little Endian byte order)
+   ``PCM_FORMAT_FLOAT64_BE``  64 bit samples encoded as float (Big Endian byte order)
+   ``PCM_FORMAT_MU_LAW``      A logarithmic encoding (used by Sun .au files and telephony)
+   ``PCM_FORMAT_A_LAW``       Another logarithmic encoding
+   ``PCM_FORMAT_IMA_ADPCM``   A 4:1 compressed format defined by the Interactive Multimedia Association.
+   ``PCM_FORMAT_MPEG``        MPEG encoded audio?
+   ``PCM_FORMAT_GSM``         9600 bits/s constant rate encoding for speech
+   ``PCM_FORMAT_S24_3LE``     Signed 24 bit samples for each channel (Little Endian byte order in 3 bytes)
+   ``PCM_FORMAT_S24_3BE``     Signed 24 bit samples for each channel (Big Endian byte order in 3 bytes)
+   ``PCM_FORMAT_U24_3LE``     Unsigned 24 bit samples for each channel (Little Endian byte order in 3 bytes)
+   ``PCM_FORMAT_U24_3BE``     Unsigned 24 bit samples for each channel (Big Endian byte order in 3 bytes)
+   =========================  ===============
+
+   * *periodsize* - the period size in frames. Each write should consist of *periodsize* frames. The default value is 32.
    * *device* - the name of the PCM device that should be used (for example
      a value from the output of :func:`pcms`). The default value is
      ``'default'``.
@@ -125,12 +165,11 @@ following arguments:
      the `device` keyword argument is ignored.
      ``0`` is the first hardware sound card.
 
-   This will construct a PCM object with these default settings:
+   This will construct a PCM object with the given settings.
 
-   * Sample format: :const:`PCM_FORMAT_S16_LE`
-   * Rate: 44100 Hz 
-   * Channels: 2
-   * Period size: 32 frames
+   *Changed in 0.9:*
+
+   - Added the optional named parameters `rate`, `channels`, `format` and `periodsize`.
 
    *Changed in 0.8:*
    
@@ -145,7 +184,6 @@ following arguments:
      
 PCM objects have the following methods:
 
-
 .. method:: PCM.pcmtype()
 
    Returns the type of PCM object. Either :const:`PCM_CAPTURE` or
@@ -162,64 +200,21 @@ PCM objects have the following methods:
 
    Return the name of the sound card used by this PCM object.
 
-
 .. method:: PCM.setchannels(nchannels)
 
-   Used to set the number of capture or playback channels. Common
-   values are: ``1`` = mono, ``2`` = stereo, and ``6`` = full 6 channel audio.
-   Few sound cards support more than 2 channels
-
+   .. deprecated:: 0.9 Use the `channels` named argument to :func:`PCM`.
 
 .. method:: PCM.setrate(rate)
 
-   Set the sample rate in Hz for the device. Typical values are ``8000``
-   (mainly used for telephony), ``16000``, ``44100`` (CD quality),
-   ``48000`` and ``96000``.
-
+   .. deprecated:: 0.9 Use the `rate` named argument to :func:`PCM`.
 
 .. method:: PCM.setformat(format)
-
-   The sound *format* of the device. Sound format controls how the PCM device
-   interpret data for playback, and how data is encoded in captures.
-
-   The following formats are provided by ALSA:
-
-   =========================  ===============
-          Format                Description
-   =========================  ===============
-   ``PCM_FORMAT_S8``          Signed 8 bit samples for each channel
-   ``PCM_FORMAT_U8``          Signed 8 bit samples for each channel
-   ``PCM_FORMAT_S16_LE``      Signed 16 bit samples for each channel Little Endian byte order)
-   ``PCM_FORMAT_S16_BE``      Signed 16 bit samples for each channel (Big Endian byte order)
-   ``PCM_FORMAT_U16_LE``      Unsigned 16 bit samples for each channel (Little Endian byte order)
-   ``PCM_FORMAT_U16_BE``      Unsigned 16 bit samples for each channel (Big Endian byte order)
-   ``PCM_FORMAT_S24_LE``      Signed 24 bit samples for each channel (Little Endian byte order)
-   ``PCM_FORMAT_S24_BE``      Signed 24 bit samples for each channel (Big Endian byte order)}
-   ``PCM_FORMAT_U24_LE``      Unsigned 24 bit samples for each channel (Little Endian byte order)
-   ``PCM_FORMAT_U24_BE``      Unsigned 24 bit samples for each channel (Big Endian byte order)
-   ``PCM_FORMAT_S32_LE``      Signed 32 bit samples for each channel (Little Endian byte order)
-   ``PCM_FORMAT_S32_BE``      Signed 32 bit samples for each channel (Big Endian byte order)
-   ``PCM_FORMAT_U32_LE``      Unsigned 32 bit samples for each channel (Little Endian byte order)
-   ``PCM_FORMAT_U32_BE``      Unsigned 32 bit samples for each channel (Big Endian byte order)
-   ``PCM_FORMAT_FLOAT_LE``    32 bit samples encoded as float (Little Endian byte order)
-   ``PCM_FORMAT_FLOAT_BE``    32 bit samples encoded as float (Big Endian byte order)
-   ``PCM_FORMAT_FLOAT64_LE``  64 bit samples encoded as float (Little Endian byte order)
-   ``PCM_FORMAT_FLOAT64_BE``  64 bit samples encoded as float (Big Endian byte order)
-   ``PCM_FORMAT_MU_LAW``      A logarithmic encoding (used by Sun .au files and telephony)
-   ``PCM_FORMAT_A_LAW``       Another logarithmic encoding
-   ``PCM_FORMAT_IMA_ADPCM``   A 4:1 compressed format defined by the Interactive Multimedia Association.
-   ``PCM_FORMAT_MPEG``        MPEG encoded audio?
-   ``PCM_FORMAT_GSM``         9600 bits/s constant rate encoding for speech
-   =========================  ===============
    
+   .. deprecated:: 0.9 Use the `format` named argument to :func:`PCM`.
 
 .. method:: PCM.setperiodsize(period)
 
-   Sets the actual period size in frames. Each write should consist of
-   exactly this number of frames, and each read will return this
-   number of frames (unless the device is in :const:`PCM_NONBLOCK` mode, in
-   which case it may return nothing at all)
-
+   .. deprecated:: 0.9 Use the `periodsize` named argument to :func:`PCM`.
 
 .. method:: PCM.read()
 
@@ -233,6 +228,9 @@ PCM objects have the following methods:
    ``(0,'')`` if no new period has become available since the last
    call to read.
 
+   In case of an overrun, this function will return a negative size: :const:`-EPIPE`.
+   This indicates that data was lost, even if the operation itself succeeded.
+   Try using a larger periodsize.
 
 .. method:: PCM.write(data)
 
@@ -256,6 +254,67 @@ PCM objects have the following methods:
    If *enable* is :const:`True`, playback or capture is paused.
    Otherwise, playback/capture is resumed.
 
+
+.. method:: PCM.polldescriptors()
+
+   Returns a tuple of *(file descriptor, eventmask)* that can be used to
+   wait for changes on the PCM with *select.poll*.
+
+   The *eventmask* value is compatible with `poll.register`__ in the Python 
+   :const:`select` module.
+
+.. method:: PCM.set_tstamp_mode([mode=PCM_TSTAMP_ENABLE])
+
+   Set the ALSA timestamp mode on the device. The mode argument can be set to
+   either :const:`PCM_TSTAMP_NONE` or :const:`PCM_TSTAMP_ENABLE`.
+
+.. method:: PCM.get_tstamp_mode()
+
+   Return the integer value corresponding to the ALSA timestamp mode. The
+   return value can be either :const:`PCM_TSTAMP_NONE` or :const:`PCM_TSTAMP_ENABLE`.
+
+.. method:: PCM.set_tstamp_type([type=PCM_TSTAMP_TYPE_GETTIMEOFDAY])
+
+   Set the ALSA timestamp mode on the device. The type argument
+   can be set to either :const:`PCM_TSTAMP_TYPE_GETTIMEOFDAY`,
+   :const:`PCM_TSTAMP_TYPE_MONOTONIC` or :const:`PCM_TSTAMP_TYPE_MONOTONIC_RAW`.
+
+.. method:: PCM.get_tstamp_type()
+
+   Return the integer value corresponding to the ALSA timestamp type. The
+   return value can be either :const:`PCM_TSTAMP_TYPE_GETTIMEOFDAY`,
+   :const:`PCM_TSTAMP_TYPE_MONOTONIC` or :const:`PCM_TSTAMP_TYPE_MONOTONIC_RAW`.
+
+.. method:: PCM.htimestamp()
+
+   Return a Python tuple *(seconds, nanoseconds, frames_available_in_buffer)*.
+
+   The type of output is controlled by the tstamp_type, as described in the table below.
+
+   =================================  ===========================================
+            Timestamp Type                             Description
+   =================================  ===========================================
+   ``PCM_TSTAMP_TYPE_GETTIMEOFDAY``   System-wide realtime clock with seconds
+                                      since epoch.
+   ``PCM_TSTAMP_TYPE_MONOTONIC``      Monotonic time from an unspecified starting
+                                      time. Progress is NTP synchronized.
+   ``PCM_TSTAMP_TYPE_MONOTONIC_RAW``  Monotonic time from an unspecified starting
+                                      time using only the system clock.
+   =================================  ===========================================
+   
+   The timestamp mode is controlled by the tstamp_mode, as described in the table below.
+
+   =================================  ===========================================
+            Timestamp Mode                             Description
+   =================================  ===========================================
+   ``PCM_TSTAMP_NONE``                No timestamp.
+   ``PCM_TSTAMP_ENABLE``              Update timestamp at every hardware position
+                                      update.
+   =================================  ===========================================
+
+
+__ poll_objects_
+
 **A few hints on using PCM devices for playback**
 
 The most common reason for problems with playback of PCM audio is that writes 
@@ -407,11 +466,11 @@ Mixer objects have the following methods:
    This method will fail if the mixer has no playback switch capabilities.
 
 
-.. method:: Mixer.getrange([direction])
+.. method:: Mixer.getrange(pcmtype=PCM_PLAYBACK)
 
    Return the volume range of the ALSA mixer controlled by this object.
 
-   The optional *direction* argument can be either :const:`PCM_PLAYBACK` or
+   The optional *pcmtype* argument can be either :const:`PCM_PLAYBACK` or
    :const:`PCM_CAPTURE`, which is relevant if the mixer can control both
    playback and capture volume.  The default value is :const:`PCM_PLAYBACK`
    if the mixer has playback channels, otherwise it is :const:`PCM_CAPTURE`.
@@ -425,18 +484,18 @@ Mixer objects have the following methods:
    This method will fail if the mixer has no capture switch capabilities.
 
 
-.. method:: Mixer.getvolume([direction])
+.. method:: Mixer.getvolume(pcmtype=PCM_PLAYBACK)
 
    Returns a list with the current volume settings for each channel. The list
    elements are integer percentages.
 
-   The optional *direction* argument can be either :const:`PCM_PLAYBACK` or
+   The optional *pcmtype* argument can be either :const:`PCM_PLAYBACK` or
    :const:`PCM_CAPTURE`, which is relevant if the mixer can control both
    playback and capture volume. The default value is :const:`PCM_PLAYBACK`
    if the mixer has playback channels, otherwise it is :const:`PCM_CAPTURE`.
 
 
-.. method:: Mixer.setvolume(volume, [channel], [direction])
+.. method:: Mixer.setvolume(volume, channel=None, pcmtype=PCM_PLAYBACK)
 
    Change the current volume settings for this mixer. The *volume* argument
    controls the new volume setting as an integer percentage.
@@ -445,7 +504,7 @@ Mixer objects have the following methods:
    only for this channel. This assumes that the mixer can control the
    volume for the channels independently.
 
-   The optional *direction* argument can be either :const:`PCM_PLAYBACK` or
+   The optional *pcmtype* argument can be either :const:`PCM_PLAYBACK` or
    :const:`PCM_CAPTURE`, which is relevant if the mixer can control both
    playback and capture volume. The default value is :const:`PCM_PLAYBACK`
    if the mixer has playback channels, otherwise it is :const:`PCM_CAPTURE`.
@@ -473,9 +532,20 @@ Mixer objects have the following methods:
 
 .. method:: Mixer.polldescriptors()
 
-   Returns a tuple of (file descriptor, eventmask) that can be used to
+   Returns a tuple of *(file descriptor, eventmask)* that can be used to
    wait for changes on the mixer with *select.poll*.
 
+   The *eventmask* value is compatible with `poll.register`__ in the Python 
+   :const:`select` module.
+
+__ poll_objects_
+
+.. method:: Mixer.handleevents()
+
+   Acknowledge events on the *polldescriptors* file descriptors
+   to prevent subsequent polls from returning the same events again.
+   Returns the number of events that were acknowledged.
+
 **A rant on the ALSA Mixer API**
 
 The ALSA mixer API is extremely complicated - and hardly documented at all.
@@ -614,3 +684,5 @@ argument::
 .. rubric:: Footnotes
 
 .. [#f1]   ALSA also allows ``PCM_ASYNC``, but this is not supported yet.
+
+.. _poll_objects: http://docs.python.org/library/select.html#poll-objects

doc/pyalsaaudio.rst

@@ -33,7 +33,7 @@ wish (even commercial purposes). There is no warranty whatsoever.
    currently fairly complete for PCM devices and Mixer access. MIDI sequencer
    support is low on our priority list, but volunteers are welcome.
 
-   If you find bugs in the wrappers please use the SourceForge bug tracker. 
+   If you find bugs in the wrappers please use thegithub issue tracker. 
    Please don't send bug reports regarding ALSA specifically. There are several
    bugs in this API, and those should be reported to the ALSA team - not me.
 
@@ -75,7 +75,7 @@ development at the time - and neither are very feature complete.
 I wrote PyAlsaAudio to fill this gap. My long term goal is to have the module
 included in the standard Python library, but that looks currently unlikely.
 
-PyAlsaAudio hass full support for sound capture, playback of sound, as well as
+PyAlsaAudio has full support for sound capture, playback of sound, as well as
 the ALSA Mixer API.
 
 MIDI support is not available, and since I don't own any MIDI hardware, it's
@@ -110,25 +110,32 @@ And then as root:  ---   ::
 Testing
 *******
 
-First of all, run::
-   
-   $ python test.py
+Make sure that :code:`aplay` plays a file through the soundcard you want, then
+try::
 
-This is a small test suite that mostly performs consistency tests. If
-it fails, please file a `bug report
-<https://github.com/larsimmisch/pyalsaaudio/issues>`_.
+  $ python playwav.py <filename.wav>
+
+If :code:`aplay` needs a device argument, like
+:code:`aplay -D hw:CARD=sndrpihifiberry,DEV=0`, use::
+
+   $ python playwav.py -d hw:CARD=sndrpihifiberry,DEV=0 <filename.wav>
 
 To test PCM recordings (on your default soundcard), verify your
 microphone works, then do::
 
-   $ python recordtest.py <filename>
+   $ python recordtest.py -d <device> <filename>
 
 Speak into the microphone, and interrupt the recording at any time
 with ``Ctl-C``.
 
 Play back the recording with::
 
-   $ python playbacktest.py <filename>
+   $ python playbacktest.py-d <device>  <filename>
 
+There is a minimal test suite in :code:`test.py`, but it is
+a bit dependent on the ALSA configuration and may fail without indicating
+a real problem.
 
+If you find bugs/problems, please file a `bug report
+<https://github.com/larsimmisch/pyalsaaudio/issues>`_.
 

doc/terminology.rst

@@ -46,7 +46,7 @@ Data rate
 
    At the other end of the scale, 96000 Hz, 6 channel sound with 64
    bit (8 bytes) samples has a data rate of 96000 \* 6 \* 8 = 4608
-   kb/s (almost 5 Mb sound data per second)
+   kb/s (almost 5 MB sound data per second)
 
 Period
    When the hardware processes data this is done in chunks of frames. The time

isine.py

@@ -6,40 +6,57 @@
 
 from __future__ import print_function
 
+import sys
 from threading import Thread
-from queue import Queue, Empty
+from multiprocessing import Queue
+
+if sys.version_info[0] < 3:
+    from Queue import Empty
+else:
+    from queue import Empty
+
 from math import pi, sin
 import struct
 import alsaaudio
 
-sampling_rate = 44100
+sampling_rate = 48000
+
 format = alsaaudio.PCM_FORMAT_S16_LE
 framesize = 2 # bytes per frame for the values above
+channels = 2
 
-def digitize(s):
-    if s > 1.0 or s < -1.0:
-        raise ValueError
-        
-    return struct.pack('h', int(s * 32767)) 
+def nearest_frequency(frequency):
+    # calculate the nearest frequency where the wave form fits into the buffer
+    # in other words, select f so that sampling_rate/f is an integer
+    return float(sampling_rate)/int(sampling_rate/frequency)
 
-def generate(frequency):
-    # generate a buffer with a sine wave of frequency
-    size = int(sampling_rate / frequency)
-    buffer = bytes()
-    for i in range(size):
-        buffer = buffer + digitize(sin(i/(2 * pi)))
+def generate(frequency, duration = 0.125):
+    # generate a buffer with a sine wave of `frequency`
+    # that is approximately `duration` seconds long
 
-    return buffer
+    # the buffersize we approximately want
+    target_size = int(sampling_rate * channels * duration)
+
+    # the length of a full sine wave at the frequency
+    cycle_size = int(sampling_rate / frequency)
+
+    # number of full cycles we can fit into target_size
+    factor = int(target_size / cycle_size)
+
+    size = max(int(cycle_size * factor), 1)
+    
+    sine = [ int(32767 * sin(2 * pi * frequency * i / sampling_rate)) \
+             for i in range(size)]
+             
+    return struct.pack('%dh' % size, *sine)
+                                                                                  
 
 class SinePlayer(Thread):
     
     def __init__(self, frequency = 440.0):
         Thread.__init__(self)
         self.setDaemon(True)
-        self.device = alsaaudio.PCM()
-        self.device.setchannels(1)
-        self.device.setformat(format)
-        self.device.setrate(sampling_rate)
+        self.device = alsaaudio.PCM(channels=channels, format=format, rate=sampling_rate)
         self.queue = Queue()
         self.change(frequency)
 
@@ -47,19 +64,15 @@ class SinePlayer(Thread):
         '''This is called outside of the player thread'''
         # we generate the buffer in the calling thread for less
         # latency when switching frequencies
-        
 
-        # More than 100 writes/s are pushing it - play multiple buffers
-        # for higher frequencies
+        if frequency > sampling_rate / 2:
+            raise ValueError('maximum frequency is %d' % (sampling_rate / 2))
 
-        factor = int(frequency/100.0)
-        if factor == 0:
-            factor = 1
-        
-        buf = generate(frequency) * factor
-        print('factor: %d, frames: %d' % (factor, len(buf) / framesize))
+        f = nearest_frequency(frequency)
+        print('nearest frequency: %f' % f)
 
-        self.queue.put( buf)
+        buf = generate(f)
+        self.queue.put(buf)
                         
     def run(self):
         buffer = None

mixertest.py

@@ -23,6 +23,12 @@ import sys
 import getopt
 import alsaaudio
 
+def list_cards():
+    print("Available sound cards:")
+    for i in alsaaudio.card_indexes():
+        (name, longname) = alsaaudio.card_name(i)
+        print("  %d: %s (%s)" % (i, name, longname))
+
 def list_mixers(kwargs):
     print("Available mixer controls:")
     for m in alsaaudio.mixers(**kwargs):
@@ -37,11 +43,36 @@ def show_mixer(name, kwargs):
         sys.exit(1)
 
     print("Mixer name: '%s'" % mixer.mixer())
-    print("Capabilities: %s %s" % (' '.join(mixer.volumecap()),
+    volcap = mixer.volumecap()
+    print("Capabilities: %s %s" % (' '.join(volcap),
                                    ' '.join(mixer.switchcap())))
+
+    if "Volume" in volcap or "Joined Volume" in volcap or "Playback Volume" in volcap:
+        pmin, pmax = mixer.getrange(alsaaudio.PCM_PLAYBACK)
+        pmin_keyword, pmax_keyword = mixer.getrange(pcmtype=alsaaudio.PCM_PLAYBACK, units=alsaaudio.VOLUME_UNITS_RAW)
+        pmin_default, pmax_default = mixer.getrange()
+        assert pmin == pmin_keyword
+        assert pmax == pmax_keyword
+        assert pmin == pmin_default
+        assert pmax == pmax_default
+        print("Raw playback volume range {}-{}".format(pmin, pmax))
+        pmin_dB, pmax_dB = mixer.getrange(units=alsaaudio.VOLUME_UNITS_DB)
+        print("dB playback volume range {}-{}".format(pmin_dB / 100.0, pmax_dB / 100.0))
+
+    if "Capture Volume" in volcap or "Joined Capture Volume" in volcap:
+        # Check that `getrange` works with keyword and positional arguments
+        cmin, cmax = mixer.getrange(alsaaudio.PCM_CAPTURE)
+        cmin_keyword, cmax_keyword = mixer.getrange(pcmtype=alsaaudio.PCM_CAPTURE, units=alsaaudio.VOLUME_UNITS_RAW)
+        assert cmin == cmin_keyword
+        assert cmax == cmax_keyword
+        print("Raw capture volume range {}-{}".format(cmin, cmax))
+        cmin_dB, cmax_dB = mixer.getrange(pcmtype=alsaaudio.PCM_CAPTURE, units=alsaaudio.VOLUME_UNITS_DB)
+        print("dB capture volume range {}-{}".format(cmin_dB / 100.0, cmax_dB / 100.0))
+
     volumes = mixer.getvolume()
+    volumes_dB = mixer.getvolume(units=alsaaudio.VOLUME_UNITS_DB)
     for i in range(len(volumes)):
-        print("Channel %i volume: %i%%" % (i,volumes[i]))
+        print("Channel %i volume: %i%% (%.1f dB)" % (i, volumes[i], volumes_dB[i] / 100.0))
         
     try:
         mutes = mixer.getmute()
@@ -113,6 +144,8 @@ if __name__ == '__main__':
         else:
             usage()
 
+    list_cards()
+
     if not len(args):
         list_mixers(kwargs)
     elif len(args) == 1:

playbacktest.py

@@ -1,4 +1,5 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
+# -*- mode: python; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*-
 
 ## playbacktest.py
 ##
@@ -21,35 +22,28 @@ import getopt
 import alsaaudio
 
 def usage():
-    print('usage: playbacktest.py [-c <card>] <file>', file=sys.stderr)
+    print('usage: playbacktest.py [-d <device>] <file>', file=sys.stderr)
     sys.exit(2)
 
 if __name__ == '__main__':
 
-    card = 'default'
+    device = 'default'
 
-    opts, args = getopt.getopt(sys.argv[1:], 'c:')
+    opts, args = getopt.getopt(sys.argv[1:], 'd:')
     for o, a in opts:
-        if o == '-c':
-            card = a
+        if o == '-d':
+            device = a
 
     if not args:
         usage()
 
     f = open(args[0], 'rb')
 
-    # Open the device in playback mode. 
-    out = alsaaudio.PCM(alsaaudio.PCM_PLAYBACK, card=card)
-
-    # Set attributes: Mono, 44100 Hz, 16 bit little endian frames
-    out.setchannels(1)
-    out.setrate(44100)
-    out.setformat(alsaaudio.PCM_FORMAT_S16_LE)
-
+    # Open the device in playback mode in Mono, 44100 Hz, 16 bit little endian frames
     # The period size controls the internal number of frames per period.
     # The significance of this parameter is documented in the ALSA api.
-    out.setperiodsize(160)
 
+    out = alsaaudio.PCM(alsaaudio.PCM_PLAYBACK, channels=1, rate=44100, format=alsaaudio.PCM_FORMAT_S16_LE, periodsize=160, device=device)
     # Read data from stdin
     data = f.read(320)
     while data:

playwav.py

@@ -1,4 +1,5 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
+# -*- mode: python; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*-
 
 # Simple test script that plays (some) wav files
 
@@ -9,55 +10,54 @@ import wave
 import getopt
 import alsaaudio
 
-def play(device, f):    
+def play(device, f):	
 
-    print('%d channels, %d sampling rate\n' % (f.getnchannels(),
-                                               f.getframerate()))
-    # Set attributes
-    device.setchannels(f.getnchannels())
-    device.setrate(f.getframerate())
+	format = None
 
-    # 8bit is unsigned in wav files
-    if f.getsampwidth() == 1:
-        device.setformat(alsaaudio.PCM_FORMAT_U8)
-    # Otherwise we assume signed data, little endian
-    elif f.getsampwidth() == 2:
-        device.setformat(alsaaudio.PCM_FORMAT_S16_LE)
-    elif f.getsampwidth() == 3:
-        device.setformat(alsaaudio.PCM_FORMAT_S24_LE)
-    elif f.getsampwidth() == 4:
-        device.setformat(alsaaudio.PCM_FORMAT_S32_LE)
-    else:
-        raise ValueError('Unsupported format')
+	# 8bit is unsigned in wav files
+	if f.getsampwidth() == 1:
+		format = alsaaudio.PCM_FORMAT_U8
+	# Otherwise we assume signed data, little endian
+	elif f.getsampwidth() == 2:
+		format = alsaaudio.PCM_FORMAT_S16_LE
+	elif f.getsampwidth() == 3:
+		format = alsaaudio.PCM_FORMAT_S24_3LE
+	elif f.getsampwidth() == 4:
+		format = alsaaudio.PCM_FORMAT_S32_LE
+	else:
+		raise ValueError('Unsupported format')
 
-    device.setperiodsize(320)
-    
-    data = f.readframes(320)
-    while data:
-        # Read data from stdin
-        device.write(data)
-        data = f.readframes(320)
+	periodsize = f.getframerate() // 8
+
+	print('%d channels, %d sampling rate, format %d, periodsize %d\n' % (f.getnchannels(),
+																		 f.getframerate(),
+																		 format,
+																		 periodsize))
+
+	device = alsaaudio.PCM(channels=f.getnchannels(), rate=f.getframerate(), format=format, periodsize=periodsize, device=device)
+	
+	data = f.readframes(periodsize)
+	while data:
+		# Read data from stdin
+		device.write(data)
+		data = f.readframes(periodsize)
 
 
 def usage():
-    print('usage: playwav.py [-c <card>] <file>', file=sys.stderr)
-    sys.exit(2)
+	print('usage: playwav.py [-d <device>] <file>', file=sys.stderr)
+	sys.exit(2)
 
 if __name__ == '__main__':
 
-    card = 'default'
+	device = 'default'
 
-    opts, args = getopt.getopt(sys.argv[1:], 'c:')
-    for o, a in opts:
-        if o == '-c':
-            card = a
+	opts, args = getopt.getopt(sys.argv[1:], 'd:')
+	for o, a in opts:
+		if o == '-d':
+			device = a
 
-    if not args:
-        usage()
-        
-    f = wave.open(args[0], 'rb')
-    device = alsaaudio.PCM(card=card)
-
-    play(device, f)
-
-    f.close()
+	if not args:
+		usage()
+		
+	with wave.open(args[0], 'rb') as f:
+		play(device, f)

recordtest.py

@@ -1,10 +1,11 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
+# -*- mode: python; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*-
 
 ## recordtest.py
 ##
 ## This is an example of a simple sound capture script.
 ##
-## The script opens an ALSA pcm forsound capture. Set
+## The script opens an ALSA pcm device for sound capture, sets
 ## various attributes of the capture, and reads in a loop,
 ## writing the data to standard out.
 ##
@@ -22,48 +23,42 @@ import getopt
 import alsaaudio
 
 def usage():
-    print('usage: recordtest.py [-c <card>] <file>', file=sys.stderr)
-    sys.exit(2)
+	print('usage: recordtest.py [-d <device>] <file>', file=sys.stderr)
+	sys.exit(2)
 
 if __name__ == '__main__':
 
-    card = 'default'
+	device = 'default'
 
-    opts, args = getopt.getopt(sys.argv[1:], 'c:')
-    for o, a in opts:
-        if o == '-c':
-            card = a
+	opts, args = getopt.getopt(sys.argv[1:], 'd:')
+	for o, a in opts:
+		if o == '-d':
+			device = a
 
-    if not args:
-        usage()
+	if not args:
+		usage()
 
-    f = open(args[0], 'wb')
+	f = open(args[0], 'wb')
 
-    # Open the device in nonblocking capture mode. The last argument could
-    # just as well have been zero for blocking mode. Then we could have
-    # left out the sleep call in the bottom of the loop
-    inp = alsaaudio.PCM(alsaaudio.PCM_CAPTURE, alsaaudio.PCM_NONBLOCK, card)
+	# Open the device in nonblocking capture mode in mono, with a sampling rate of 44100 Hz 
+	# and 16 bit little endian samples
+	# The period size controls the internal number of frames per period.
+	# The significance of this parameter is documented in the ALSA api.
+	# For our purposes, it is suficcient to know that reads from the device
+	# will return this many frames. Each frame being 2 bytes long.
+	# This means that the reads below will return either 320 bytes of data
+	# or 0 bytes of data. The latter is possible because we are in nonblocking
+	# mode.
+	inp = alsaaudio.PCM(alsaaudio.PCM_CAPTURE, alsaaudio.PCM_NONBLOCK, 
+		channels=1, rate=44100, format=alsaaudio.PCM_FORMAT_S16_LE, 
+		periodsize=160, device=device)
 
-    # Set attributes: Mono, 44100 Hz, 16 bit little endian samples
-    inp.setchannels(1)
-    inp.setrate(44100)
-    inp.setformat(alsaaudio.PCM_FORMAT_S16_LE)
+	loops = 1000000
+	while loops > 0:
+		loops -= 1
+		# Read data from device
+		l, data = inp.read()
 
-    # The period size controls the internal number of frames per period.
-    # The significance of this parameter is documented in the ALSA api.
-    # For our purposes, it is suficcient to know that reads from the device
-    # will return this many frames. Each frame being 2 bytes long.
-    # This means that the reads below will return either 320 bytes of data
-    # or 0 bytes of data. The latter is possible because we are in nonblocking
-    # mode.
-    inp.setperiodsize(160)
-    
-    loops = 1000000
-    while loops > 0:
-        loops -= 1
-        # Read data from device
-        l, data = inp.read()
-      
-        if l:
-            f.write(data)
-            time.sleep(.001)
+		if l:
+			f.write(data)
+			time.sleep(.001)

setup.py

@@ -4,25 +4,11 @@
 It is fairly complete for PCM devices and Mixer access.
 '''
 
-import subprocess
-from distutils.core import setup
-from distutils.extension import Extension
+from setuptools import setup
+from setuptools.extension import Extension
 from sys import version
 
-def gitrev():
-    rev = subprocess.check_output(['git', 'describe', '--tags', '--dirty=-dev',
-                                  '--always'])
-    return rev.decode('utf-8').strip()
-
-pyalsa_version = gitrev()
-
-# patch distutils if it's too old to cope with the "classifiers" or
-# "download_url" keywords
-from sys import version
-if version < '2.2.3':
-    from distutils.dist import DistributionMetadata
-    DistributionMetadata.classifiers = None
-    DistributionMetadata.download_url = None
+pyalsa_version = '0.9.1'
 
 if __name__ == '__main__':
     setup(

test.py

@@ -1,4 +1,5 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
+# -*- mode: python; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*-
 
 # These are internal tests. They shouldn't fail, but they don't cover all
 # of the ALSA API. Most importantly PCM.read and PCM.write are missing.
@@ -12,134 +13,148 @@ import alsaaudio
 import warnings
 
 # we can't test read and write well - these are tested otherwise
-PCMMethods = [('pcmtype', None),
-              ('pcmmode', None),
-              ('cardname', None),
-              ('setchannels', (2,)), 
-              ('setrate', (44100,)),
-              ('setformat', (alsaaudio.PCM_FORMAT_S8,)),
-              ('setperiodsize', (320,))]
+PCMMethods = [
+	('pcmtype', None),
+	('pcmmode', None),
+	('cardname', None)
+]
+
+PCMDeprecatedMethods = [
+	('setchannels', (2,)), 
+	('setrate', (44100,)),
+	('setformat', (alsaaudio.PCM_FORMAT_S8,)),
+	('setperiodsize', (320,))
+]
 
 # A clever test would look at the Mixer capabilities and selectively run the
 # omitted tests, but I am too tired for that.
 
 MixerMethods = [('cardname', None),
-                ('mixer', None),
-                ('mixerid', None),
-                ('switchcap', None),
-                ('volumecap', None),
-                ('getvolume', None),
-                ('getrange', None),
-                ('getenum', None),
-#                ('getmute', None),
-#                ('getrec', None),
-#                ('setvolume', (60,)),
-#                ('setmute', (0,))
-#                ('setrec', (0')),
-                ]
+				('mixer', None),
+				('mixerid', None),
+				('switchcap', None),
+				('volumecap', None),
+				('getvolume', None),
+				('getrange', None),
+				('getenum', None),
+#				('getmute', None),
+#				('getrec', None),
+#				('setvolume', (60,)),
+#				('setmute', (0,))
+#				('setrec', (0')),
+				]
 
 class MixerTest(unittest.TestCase):
-    """Test Mixer objects"""
+	"""Test Mixer objects"""
 
-    def testMixer(self):
-        """Open the default Mixers and the Mixers on every card"""
-        
-        for d in ['default'] + list(range(len(alsaaudio.cards()))):
-            if type(d) == type(0):
-                kwargs = { 'cardindex': d }
-            else:
-                kwargs = { 'device': d }
+	def testMixer(self):
+		"""Open the default Mixers and the Mixers on every card"""
+		
+		for c in alsaaudio.card_indexes():
+			mixers = alsaaudio.mixers(cardindex=c)
+			
+			for m in mixers:
+				mixer = alsaaudio.Mixer(m, cardindex=c)
+				mixer.close()
 
-            mixers = alsaaudio.mixers(**kwargs)
-            
-            for m in mixers:
-                mixer = alsaaudio.Mixer(m, **kwargs)
-                mixer.close()
+	def testMixerAll(self):
+		"Run common Mixer methods on an open object"
 
-    def testMixerAll(self):
-        "Run common Mixer methods on an open object"
+		mixers = alsaaudio.mixers()
+		mixer = alsaaudio.Mixer(mixers[0])
 
-        mixers = alsaaudio.mixers()
-        mixer = alsaaudio.Mixer(mixers[0])
+		for m, a in MixerMethods:
+			f = alsaaudio.Mixer.__dict__[m]
+			if a is None:
+				f(mixer)
+			else:
+				f(mixer, *a)
 
-        for m, a in MixerMethods:
-            f = alsaaudio.Mixer.__dict__[m]
-            if a is None:
-                f(mixer)
-            else:
-                f(mixer, *a)
+		mixer.close()
 
-        mixer.close()
+	def testMixerClose(self):
+		"""Run common Mixer methods on a closed object and verify it raises an 
+		error"""
 
-    def testMixerClose(self):
-        """Run common Mixer methods on a closed object and verify it raises an 
-        error"""
+		mixers = alsaaudio.mixers()
+		mixer = alsaaudio.Mixer(mixers[0])
+		mixer.close()
 
-        mixers = alsaaudio.mixers()
-        mixer = alsaaudio.Mixer(mixers[0])
-        mixer.close()
-
-        for m, a in MixerMethods:
-            f = alsaaudio.Mixer.__dict__[m]
-            if a is None:
-                self.assertRaises(alsaaudio.ALSAAudioError, f, mixer)
-            else:
-                self.assertRaises(alsaaudio.ALSAAudioError, f, mixer, *a)
+		for m, a in MixerMethods:
+			f = alsaaudio.Mixer.__dict__[m]
+			if a is None:
+				self.assertRaises(alsaaudio.ALSAAudioError, f, mixer)
+			else:
+				self.assertRaises(alsaaudio.ALSAAudioError, f, mixer, *a)
 
 class PCMTest(unittest.TestCase):
-    """Test PCM objects"""
+	"""Test PCM objects"""
 
-    def testPCM(self):
-        "Open a PCM object on every device"
+	def testPCM(self):
+		"Open a PCM object on every card"
 
-        for pd in alsaaudio.pcms():
-            pcm = alsaaudio.PCM(device=pd)
-            pcm.close()
+		for c in alsaaudio.card_indexes():
+			pcm = alsaaudio.PCM(cardindex=c)
+			pcm.close()
 
-        for pd in alsaaudio.pcms(alsaaudio.PCM_CAPTURE):
-            pcm = alsaaudio.PCM(alsaaudio.PCM_CAPTURE, device=pd)
-            pcm.close()
+	def testPCMAll(self):
+		"Run all PCM methods on an open object"
 
-    def testPCMAll(self):
-        "Run all PCM methods on an open object"
+		pcm = alsaaudio.PCM()
 
-        pcm = alsaaudio.PCM()
+		for m, a in PCMMethods:
+			f = alsaaudio.PCM.__dict__[m]
+			if a is None:
+				f(pcm)
+			else:
+				f(pcm, *a)
 
-        for m, a in PCMMethods:
-            f = alsaaudio.PCM.__dict__[m]
-            if a is None:
-                f(pcm)
-            else:
-                f(pcm, *a)
+		pcm.close()
 
-        pcm.close()
+	def testPCMClose(self):
+		"Run all PCM methods on a closed object and verify it raises an error"
 
-    def testPCMClose(self):
-        "Run all PCM methods on a closed object and verify it raises an error"
+		pcm = alsaaudio.PCM()
+		pcm.close()
 
-        pcm = alsaaudio.PCM()
-        pcm.close()
+		for m, a in PCMMethods:
+			f = alsaaudio.PCM.__dict__[m]
+			if a is None:
+				self.assertRaises(alsaaudio.ALSAAudioError, f, pcm)
+			else:
+				self.assertRaises(alsaaudio.ALSAAudioError, f, pcm, *a)
 
-        for m, a in PCMMethods:
-            f = alsaaudio.PCM.__dict__[m]
-            if a is None:
-                self.assertRaises(alsaaudio.ALSAAudioError, f, pcm)
-            else:
-                self.assertRaises(alsaaudio.ALSAAudioError, f, pcm, *a)
+	def testPCMDeprecated(self):
+		with warnings.catch_warnings(record=True) as w:
+			# Cause all warnings to always be triggered.
+			warnings.simplefilter("always")
 
-    def testPCMDeprecated(self):
-        with warnings.catch_warnings(record=True) as w:
-            # Cause all warnings to always be triggered.
-            warnings.simplefilter("always")
+			try:
+				pcm = alsaaudio.PCM(card='default')
+			except alsaaudio.ALSAAudioError:
+				pass
+				
+			# Verify we got a DepreciationWarning
+			self.assertEqual(len(w), 1, "PCM(card='default') expected a warning" )
+			self.assertTrue(issubclass(w[-1].category, DeprecationWarning), "PCM(card='default') expected a DeprecationWarning")
+
+		for m, a in PCMDeprecatedMethods:
+			with warnings.catch_warnings(record=True) as w:
+				# Cause all warnings to always be triggered.
+				warnings.simplefilter("always")
+
+				pcm = alsaaudio.PCM()
+
+				f = alsaaudio.PCM.__dict__[m]
+				if a is None:
+					f(pcm)
+				else:
+					f(pcm, *a)
+
+				# Verify we got a DepreciationWarning
+				method = "%s%s" % (m, str(a))
+				self.assertEqual(len(w), 1, method + " expected a warning")
+				self.assertTrue(issubclass(w[-1].category, DeprecationWarning), method + " expected a DeprecationWarning")
 
-            try:
-                pcm = alsaaudio.PCM(card='default')
-            except alsaaudio.ALSAAudioError:
-                pass
-                
-            # Verify we got a DepreciationWarning
-            assert len(w) == 1
-            assert issubclass(w[-1].category, DeprecationWarning)
-                
 if __name__ == '__main__':
-    unittest.main()
+	unittest.main()