[1] removed target_halt() from cortex_m_assert_reset()
It broke debug_reason tracking and the previous reason
was shown after reset halt.
Set debug_reason to DBG_REASON_DBGRQ during reset halt
preparation.
Fixes: [1] commit 226085065b ("target/cortex_m: drop useless target_halt() call")
Reported-by: Marc Schink <dev@zapb.de>
Change-Id: I685618ed158abde11f6e00eeeee1dfa8ed90952d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8945
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Adapters: bcm2835gpio, imx_gpio, am335xgpio, ep93xx and at91rm9200
Allow the user to enable them regardless of the target architecture.
Change-Id: I9fbc7cbefe770ea2e2239b95a3305fd29127fa85
Signed-off-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8892
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Update MPIDR decode to support the multithreading (MT) bit.
If detected, socket, cluster, core and multithread affinity levels are
decoded and displayed.
Change-Id: I43569141fa0eef8ee8fc16c187a4af3c23e97db8
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7190
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Macro AM_PROG_CC_C_O has been obsolete since Automake 1.14,
released in June 2013 (12 years ago).
It used to check whether the C compiler supports the -c and -o options,
but that is now included in AC_PROG_CC.
Increase the minimum required Automake version to 1.14 accordingly.
Also remove the "not a GNU package" comment,
which does not really make sense.
Change-Id: I987ba8686721c7f36fba81e100f1c3ddf77f636d
Signed-off-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8942
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Freeing pending transfers on shutdown is done in openOCD
and on libusb side. This created concurrency in freeing
memory and segmentation faults:
https://github.com/libusb/libusb/issues/1627
Bug is reproduced better if many targets are laucnhed.
Bug was reproduced with CMSIS-DAP on targets:
cyw20829, psoc4, stm32l5 if launching multiple times.
Proposed working fix: if some transfers pending/in-flight
on 'shutdown' then apply libusb_handle_events_timeout_completed()
to make transfer complete. In all cases transfer completed
due to tests.
Change-Id: I44621ac6096791714910220d04614d0a19ce47bd
Signed-off-by: kryvosheiaivan <Ivan.Kryvosheia@infineon.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8876
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The adapter is not available for years now. There is also no information
about this device from Gateworks. The poor hardware availability and the
lack of users prevents testing, maintenance and adaptations to future
changes.
Mark the adapter as deprecated as a first step to give potential users
the opportunity to upgrade the hardware until the next OpenOCD release.
Change-Id: I037325a6b018b26608733a36bef30db2785858f8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8651
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The adapter is not available for years now and Amontec is not even a
company anymore. The poor hardware availability and the lack of users
prevents testing, maintenance and adaptations to future changes.
Mark the adapter as deprecated as a first step to give potential users
the opportunity to upgrade the hardware until the next OpenOCD release.
Change-Id: Idd9fb75588246bc39e12ea17a71435ed77f0f50b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8349
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
We often get on Gerrit a new version of an old patch with a new
'Change-Id' value. This breaks the history of the review, adding
more work to the review process.
Describe in HACKING why the hook 'commit-msg' is required and how
to handle the 'Change-Id' on new patch versions.
Change-Id: I5c060b19f966add7422704912b38e1ab2f788e5f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8940
Tested-by: jenkins
The Orange Pi Zero 3 is an SBC that uses an Allwinner H618
SoC. As such, JTAG support is fully available, however the
SoC multiplexes JTAG function with UART1 and microSD.
Unfortunately Xunlong has used UART1 for the Wifi-BT
chip, leaving JTAG accessible only via the microSD using
a microSD breakout board (for example).
Change-Id: I0dc078cd2f3176815271917eb5e948cc8ef94525
Signed-off-by: Electric Worry <me@electricworry.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The Allwinner H618 is an updated H616 but appears functionally
equivalent. It is used in small boards such as Orange Pi Zero 3.
Change-Id: I299a42be746189f3e8e31070aa26b83ab7d806a4
Signed-off-by: Electric Worry <me@electricworry.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8936
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
fallback programming without loader when resources are not available
while at there refactor reused code
(wait for interrupt and command execution)
Change-Id: I2cba0f53d3470bc324f4a72614c236cebf196f64
Signed-off-by: BOCHKATI Tarek <tarek.bochkati@st.com>
Signed-off-by: HAOUES Ahmed <ahmed.haoues@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8883
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
With commit d8a2f6dbcf ("configure.ac: show the Amontec
JTAG-Accelerator driver in the config summary") the driver
amt_jtagaccel is now build by default on Linux.
This highlights the dependency of some include files, dependency
that is not properly managed and that can cause build failure.
The driver is queued to be dropped soon, so there is no real
interest to fix the dependencies.
Change the default so the driver is not built if the user does not
require it at configure time.
Change-Id: Ifb74e2c802abda290efbf59ca4ce02048c94e6f8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8939
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Tested-by: jenkins
By merging [1] and [2], the drivers 'xlnx-pcie-xvc' and 'linuxspidev'
are now build by default on Linux.
This highlights the dependency of some include files under subfolder
'linux' that are not installed by default in all Linux boxes.
Add the check in 'configure' for the presence of the include file
and conditionally enable the build of the driver.
Change-Id: Ie88645c3455ab07622f069a0cc7bf09d1a5a2c75
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Link: [1] 7214c8be46 ("configure: show adapter Xilinx XVC/PCIe in the configuration summary")
Link: [2] 83e0293f7b ("Add Linux SPI device SWD adapter support")
Reviewed-on: https://review.openocd.org/c/openocd/+/8935
Tested-by: jenkins
For aarch32 secure EL3
- Change target_el to 3 for SVC/ABT/IRQ/FIQ/UND/SYS for aarch32 secure
EL3
- Do not update SPSR for SYS, behavior is UNPREDICTABLE (ARMv8-A F5.1.121)
- Do not execute DRPS for SYS, behavior is UNPREDICTABLE (ARMv8-A
F5.1.51)
Change-Id: Ic1484665cd53afcccb5c20b152993a3f0407f8a2
Signed-off-by: Kevin Yang <kangyang@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5854
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Plamena Marinova <pmarinova@hilscher.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
raspberrypi.com is the home for technical information, raspberrypi.org
is the Foundation's site (though there are intelligent redirects).
Several pages have moved around, fix these.
Also tweak a few comments for style and correctness.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: I7f52bcc362fb213b50987e3a42866fe4a6fec883
Reviewed-on: https://review.openocd.org/c/openocd/+/8885
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The peripheral address details have been removed from the documentation
part of the website (instead presented in the SoC datasheets).
Pi 5 GPIOs are provided by the RP1 southbridge, which requires the use
of libgpiod. The associated Linux driver for the GPIO interface must be
used when bitbashing on Pi 5, as the timing of pin state changes is not
guaranteed across the PCIe link without special treatment.
Using libgpiod, the typical maximum swclk speed is 1MHz.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: I8b2c44ec5edd71abaa0a763ba4d4f4603a211348
Reviewed-on: https://review.openocd.org/c/openocd/+/8884
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This command allows to read non-memory mapped flash content directly
via Tcl script. The API is the same as for the 'read_memory' command
for targets.
Change-Id: I4a8d0d7ea2f778ac8f1501227b60b964c881cb84
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8634
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change adds a polling mechanism to the driver. When not busy
the driver issues a wait, allowing the target to advance time.
The wait period gets adjusted to match the polling setting.
Change-Id: I67f481d05d7c5ce5352b5cb97de78dbaa97d82ae
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8221
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Enable the trace port (GPIOE) clock, otherwise the following pin
configurations have no effect.
Change-Id: I3942d2527c64340463c3b6c607addb4214f83081
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8823
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
P25Q16 can be found in the Efinix T13/20Q100F3, so that one is necessary
for jtagspi on those chips. The other ones were added for completeness.
Change-Id: Ifb6f3c6fbd23938d6fd26bce7742c3484ece130c
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8223
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The function find_file() is supposed to be called when the search
dirs in 'script_search_dirs' has already been populated.
This is not the case when the command 'ocd_find' is used in one of
the embedded scripts 'startup.tcl'. It then triggers SIGSEGV.
Check for 'script_search_dirs' and eventually skip searching in
the dirs.
Change-Id: I9e75a8739c94de72041fb64487910d60dffcb2bd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8931
Tested-by: jenkins
Board configuration files for specific external debug adapters are not /
no longer supported.
Checkpatch-ignore: LONG_LINE_STRING
Change-Id: I0f391dfb1a2d7ceb92c2ad3e34eaeb8a85b2cdc5
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8865
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add the old configuration files to the 'file_renaming' list in order to
ensure backwards compatibility.
Change-Id: Ia61df8e5cd8c19cee19a494635c8025e36f3f4a7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8907
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move board configuration files into a dedicated vendor directory as
required by the new guideline for configuration files.
Change-Id: Icbf368d7a453c82813e685d2935b186eb738c3ea
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8864
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move target configuration files into a dedicated vendor directory as
required by the new guideline for configuration files.
Note that the moved files are still accessible via the old path to ensure
backwards compatibility. This works because of the extended file search in
vendor folders.
Change-Id: If3935985769dc543e8c7d72cda590c9d79303abb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8905
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The TCL configuration files are going to be dispatched in vendor
specific folders.
Old user configuration files will fail to find the new files to
include, so a set of fallback files reporting the deprecation
should replace the renamed files.
To prevent such enormous proliferation of fallback files, extend
the search of files in the vendor folders too.
For non-trivial renames, a dedicated table is added in the file
tcl/file_renaming.cfg to track old --> new file names.
The deprecated message is then part of the extended search.
E.g.:
old file names:
- path/to/a/certain/vendor_config_file
- path/to/a/certain/vendor-config_file
trigger search of:
- path/to/a/certain/vendor/config_file
and
- path/to/a/certain/config_file
trigger search of:
- path/to/a/certain/${vendor}/config_file
among a possible vendors list.
This is a temporarily feature that should be removed as soon as
possible to prevent clashing on files with the same name.
The names in tcl/file_renaming.cfg are for demonstration purpose
only and should be dropped when the first real entries are added.
Change-Id: If4793fef27dc570d5df4ff4d77a5e36004f394f6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8929
Tested-by: jenkins
Fix endianness for cortex_r4 and cortex_r5 when inserting software
breakpoints. Because the cortex_a target is used by the cortex_r
architecture and some chips start in BE by default (e.g. TMS570)
Change-Id: I68b7fe7c4604de67fee2e64fff0fad2691659a58
Signed-off-by: Lucien Dufour <lucien.buchmann@dufour.aero>
Reviewed-on: https://review.openocd.org/c/openocd/+/8909
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When SMP is enabled, gdb will always use the first target in the SMP
group. That doesn't work when that first target is unavailable, but
others in the SMP group are still available.
For cases where gdb expects an operation to affect the entire group (run
control, memory access), find the first available target in an SMP group
and use that.
Imported from
https://github.com/riscv-collab/riscv-openocd/pull/767
Change-Id: I4bed600da3ac0fdfe4287d8fdd090a58452db501
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8912
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The numeric value '3' for the ASCII character CTRL-C is not
immediately readable, even if the lines that follow explicitly
mention CTRL-C.
Use the same macro present in `telnet_server.c` to replace the
numeric value.
Change-Id: Iaf4296b1f0e384f8122d8a4875cad17e8ddaf66a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8922
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
GDB server debug logging eat Ctrl-C when gdb user issues interrupt
in time of communication between OpenOCD and gdb.
E.g. Ctrl-C after `next` gdb command taking many
gdb remote protocol $vCont;s (steps)
Change-Id: I4a65446a9bb25a28e50566607b3dec116fa7d2cd
Suggested-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8920
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since the initial commit f444c57bf2 ("arm_cti: add cti command
group") the helper handle_cti_dump() return JIM error codes.
Fix it by returning standard OpenOCD error codes.
Change-Id: Ia36b82083d213aff90fe22fcfe7fbe26172806a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8904
Tested-by: jenkins
With the rewrite of jim_handler commands as COMMAND_HANDLER, some
camelcase symbol from jimtcl are not referenced anymore in OpenOCD
code.
Drop such symbols from the camelcase whitelist.
Change-Id: I723be1820f13fe2cec7e4f0512a5e9da12889199
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8902
Tested-by: jenkins
