The STM32U0xx devices support only SWD.
Add swd transport in the target file.
Remove swd transport from the associated board files.
Change-Id: I2d31856951d15fcf2d1986ee5b1b31464e68db1c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9427
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Ahmed Haoues <ahmed.haoues@st.com>
The STM32L0xx devices support only SWD.
Drop swj support.
Add swd transport.
Remove swd transport from the associated board files.
Change-Id: I5f8fb4344b33f8bdefd67fd86326f4dccb674d92
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9426
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Ahmed Haoues <ahmed.haoues@st.com>
Tested-by: jenkins
The datasheets for all STM32G0xx devices report that only SWD is
supported. No TDI/TDO pin is present.
Drop swj support.
Add swd transport.
Remove swd transport from the associated board files.
Change-Id: Ib29171dd614eb84346e90cb447bc7292465095ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9425
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Ahmed Haoues <ahmed.haoues@st.com>
The datasheets for all STM32F0xx devices report that only SWD is
supported. No TDI/TDO pin is present.
Drop swj support.
Add swd transport.
Remove swd transport from the associated board files.
Change-Id: I65a08b6a441d794aa209cff8583a971d3546f49e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9424
Reviewed-by: Ahmed Haoues <ahmed.haoues@st.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The datasheets for all STM32C0xx devices report that only SWD is
supported. No TDI/TDO pin is present.
Drop swj support.
Add swd transport.
Remove swd transport from the associated board files.
Change-Id: If6e630858aa64fbb3938a520604748f3f0ff7356
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9423
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Ahmed Haoues <ahmed.haoues@st.com>
Tested-by: jenkins
Historically swj_newdap was necessary to handle HLA properly.
Since commit 60f104f450 ("hla_transport: split command
registration per transport") there is no point in using
swj_newdap on SWD only devices.
Drop 'transport select swd' from board files referring to
these targets.
While on it remove useless endianness option handling.
Change-Id: Icb4c04c79998369059044c203edcca61648aa936
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/9435
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Replace "_" file separator with "-" file separator as recommended by
coding standards guidelines. While doing this, add the files that were
present in previous v0.12.0 release to file_renaming.cfg for this
non-trivial rename.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I88685f08f4a0cc580fa3b03f6db0d85061d65b94
Reviewed-on: https://review.openocd.org/c/openocd/+/9236
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Rename the _swd_native.cfg files as -self-hosted.cfg files as a better
representation of what we are using the configuration files to be.
Change-Id: I4eb469a219b83de6a9e7a8dfef5607306f59a7cd
Suggested-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9206
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
As part of the cfg file cleanups, let us move the TI evms, launchpads
and other development platform configuration files to board/ti folder.
While at this, drop the "ti_" prefix as the folder structure gives us
the details anyways.
Change-Id: I929b88e0cf6527f3181820ad0b9b4744185eabaf
Suggested-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9205
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move the BeagleBoard.org Foundation boards to it's own folder. This
allows additional support such as BeagleV-Fire and other non TI SoC
vendor support to be subsequently added.
While doing this,
* Use "-" as separator for the file names as recommended
by coding standards.
* To maintain compatibility, add the non-trivial renames to
file_renaming.cfg
Change-Id: Ie916c9bf81fc3922bf19ed9ed2db841549d29ca9
Suggested-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9204
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Move the ti targets to a TI folder. Since the folder is ti, we can
drop the "ti" prefix from the files themselves.
Done via the following script:
mkdir target/ti
FILES=`ls target/ti*.cfg target/omap*.cfg target/am335x.cfg
target/amdm37x.cfg target/icepick.cfg target/stellaris.cfg
target/davinci.cfg`
for cname in $FILES
do
bname=`basename $cname`
nname=`echo $bname|sed -e "s/^ti-//g"|sed -e "s/ti_//g"`
npath="target/ti/$nname"
echo "$cname => $npath"
fref=`git grep $cname .|cut -d ':' -f1|sort -u`
sed -i -e "s&$cname&$npath&g" $fref
git mv $cname $npath
done
Change-Id: I9f94dc6bb01f73721d4ff96be92cb51de2cbf0e2
Suggested-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9203
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
pico-debug and pico2-debug are virtual CMSIS-DAP adapters that
run on the otherwise dormant second core of the RP2040 and RP2350
respectively.
Change-Id: Ifd7dcbbabeb86c738cc58854add0e897633197de
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9099
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Move the configuration files into a dedicated vendor folder as required
by the developer guidelines.
Change-Id: I5bf048f2d8d0fccbcfe40e0a0e7b30dfbab192d1
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/9082
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Add a board configuration file for the MikroElektronika Clicker 4 for
STM32F745VG (MIKROE-6331), which contains their CMSIS-DAP-compatible
on-board CODEGRIP programmer.
Place this into its own subdirectory, since MikroElektronika has quite a
few boards in their portfolio.
Change-Id: If24ca286d65e024f3c3a8522b67727e268ab0bc9
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8997
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add support for the targets stm32mp21x, stm32mp23x and stm32mp25x.
Add support for the boards stm32mp235f-dk and stm32mp257f-dk.
The board stm32mp215f-dk has no configuration file as it only
provides a generic JTAG/SWD connector for the stm32mp21x SoC.
Change-Id: I0256bebd8a5d5600066d8ae191d83344a35d3d37
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8985
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Move the existing files for STM32MP13x and STM32MP15x in the
folder "st".
Rename the board files using the correct names.
While there, add the missing URL to one of the boards.
Change-Id: If8b92f55e3390ebc75df6a2ea09fcf798ea0b8cf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8982
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Microchip's PIC64GX Curiosity Board has a RISC-V core complex with 4
application processors and one monitor processor. The Curiosity kit also
has an on-board debug interface based around an FTDI 4232H device.
This patch adds basic target, interface and board support for PIC64GX
Curiosity Kit.
Change-Id: I2234d8725744fbae00b3909773b370e5c18debd8
Signed-off-by: Liam Fletcher <liam.fletcher@microchip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8878
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
We use swd emulation in direct memory operations. Instead of relying
on deprecated autoselect of transport, explicitly state swd as
transport scheme.
Change-Id: Iec7e2ad18edd365992cd7ba88558494bccf49fd2
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8975
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The Orange Pi Zero 3 is an SBC that uses an Allwinner H618
SoC. As such, JTAG support is fully available, however the
SoC multiplexes JTAG function with UART1 and microSD.
Unfortunately Xunlong has used UART1 for the Wifi-BT
chip, leaving JTAG accessible only via the microSD using
a microSD breakout board (for example).
Change-Id: I0dc078cd2f3176815271917eb5e948cc8ef94525
Signed-off-by: Electric Worry <me@electricworry.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
raspberrypi.com is the home for technical information, raspberrypi.org
is the Foundation's site (though there are intelligent redirects).
Several pages have moved around, fix these.
Also tweak a few comments for style and correctness.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: I7f52bcc362fb213b50987e3a42866fe4a6fec883
Reviewed-on: https://review.openocd.org/c/openocd/+/8885
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This change adds a polling mechanism to the driver. When not busy
the driver issues a wait, allowing the target to advance time.
The wait period gets adjusted to match the polling setting.
Change-Id: I67f481d05d7c5ce5352b5cb97de78dbaa97d82ae
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8221
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Board configuration files for specific external debug adapters are not /
no longer supported.
Checkpatch-ignore: LONG_LINE_STRING
Change-Id: I0f391dfb1a2d7ceb92c2ad3e34eaeb8a85b2cdc5
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8865
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move board configuration files into a dedicated vendor directory as
required by the new guideline for configuration files.
Change-Id: Icbf368d7a453c82813e685d2935b186eb738c3ea
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8864
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The STLink API that supports dap-direct is available from STLink
firmware v2j24, published in early 2015.
We can reasonably expect that any old STLink still in use today
has got at least one firmware update during the last 10 years.
Most of the board files in upstream OpenOCD still use the STLink
in HLA mode. This limits the test coverage of the dap-direct code,
which was introduced in OpenOCD v0.11.0.
- Rename interface/stlink.cfg as interface/stlink-hla.cfg to still
provide support for HLA, adding a deprecated message.
- Rename interface/stlink-dap.cfg as interface/stlink.cfg to make
dap-direct the default trasport.
- Add a redirect file interface/stlink-dap.cfg for users that have
out-of-tree custom board files.
- Update all the board files to the new setup.
- Remove STLink HLA mentions from the documentation, while adding
a reference to interface/stlink-hla.cfg
Checkpatch-ignore: LONG_LINE
Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8523
Tested-by: jenkins
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Direct memory driver swd native configuration for am62a7, am62p and
J722S SoCs. All three share common memory map for the debug address
map, so there is a strong reuse. However, introduce board file
specific to the board to allow users to directly get started.
Change-Id: I5609925a2e9918fd4c91d9fd40fbee98de27fdbc
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8283
Tested-by: jenkins
Reviewed-by: Vaishnav M A <vaishnav@beagleboard.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
