Embedded flash also has a user signature area. This is a 512
bytes large page whose data are not erased by asserting ERASE pin or by
software ERASE command. It may be used to store configuration, keys,
trimming values etc.
This commit adds option to access this area from OpenOCD.
Change-Id: If870aa85938b9cccd94f958dd1f3d93dbdf779f0
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8302
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Move the configuration files into a dedicated vendor folder as required
by the developer guidelines.
Change-Id: I5bf048f2d8d0fccbcfe40e0a0e7b30dfbab192d1
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/9082
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Processors.
QCS6490 and QCM6490 are 6nm processors designed for enterprise and IOT
applications featuring global 5G and Wi-Fi 6E support with similar
architecture.
This configuration file will allow debugging applications on these
processors.
Verified with Olimex(ARM-USB-OCD-H):
openocd -f tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg
-c 'transport select jtag'
-f <path_to_qcs6490_cfg>
and Jlink:
openocd -f tcl/interface/jlink.cfg
-c 'transport select jtag'
-f <path_to_qcs6490_cfg>
Change-Id: I05e923293134eaa9b70d3cf0d18efac9a024b6c7
Signed-off-by: Ashi Gupta <quic_ashig@quicinc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8615
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The Rockchip RK3588 SoC is used in systems such as the GenBook RK3588
open-hardware laptop and the Coolpi CM5 compute module. This patch adds
support for debugging those. Tested using the ST-LINK/V2 debug adapter
in SWD mode connected to the SDMMC_D2 (SWCLK) and SDMMC_D3 (SWDIO) pins
on the 50-pin J17 connector inside the GenBook RK3588 laptop.
Change-Id: Ia5da403054b6c9aa41184a4e092a74aa882a267d
Signed-off-by: Andreas Dannenberg <andre@miauco.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9013
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Update jtag driver code to reflect these changes and properly drive
Angie probe.
The rationale behind this is to increase the probe performances,
especially in use cases when large files shall be loaded on a target.
The USB transfer performances are now close to those obtained with a
standard FTDI probe.
Change-Id: I3b31d75a3f66c2d07fed8c7423f765acc30925f8
Signed-off-by: Adrien Charruel <acharruel@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8711
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The max32xxx tcl files have been updated to work with the new flashing
algorithm. A new max32xxx.cfg file contains common configuration and
functionality.
Change-Id: Ifaed58836d221ece6192faafa382b30fb72c77a6
Signed-off-by: Henrik Mau <henrik.mau@analog.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8976
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add a board configuration file for the MikroElektronika Clicker 4 for
STM32F745VG (MIKROE-6331), which contains their CMSIS-DAP-compatible
on-board CODEGRIP programmer.
Place this into its own subdirectory, since MikroElektronika has quite a
few boards in their portfolio.
Change-Id: If24ca286d65e024f3c3a8522b67727e268ab0bc9
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8997
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add support for the targets stm32mp21x, stm32mp23x and stm32mp25x.
Add support for the boards stm32mp235f-dk and stm32mp257f-dk.
The board stm32mp215f-dk has no configuration file as it only
provides a generic JTAG/SWD connector for the stm32mp21x SoC.
Change-Id: I0256bebd8a5d5600066d8ae191d83344a35d3d37
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8985
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Align the target script to the handshake implemented in the latest
version of stm32wrapper4dbg to get access to the debug port.
Use hwthread with the SMP node.
Allow ignoring/masking some CPU from the configuration with the
variables EN_<cpu>.
Change-Id: I7117dd7df20b4f6b6e28f911e3e91ee763bdd200
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8984
Tested-by: jenkins
Align the target script to the handshake implemented in the latest
version of stm32wrapper4dbg to get access to the debug port.
Change-Id: Ia1c7773330fda776abb4385331fddbf431d11c39
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8983
Tested-by: jenkins
Move the existing files for STM32MP13x and STM32MP15x in the
folder "st".
Rename the board files using the correct names.
While there, add the missing URL to one of the boards.
Change-Id: If8b92f55e3390ebc75df6a2ea09fcf798ea0b8cf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8982
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Microchip's PIC64GX Curiosity Board has a RISC-V core complex with 4
application processors and one monitor processor. The Curiosity kit also
has an on-board debug interface based around an FTDI 4232H device.
This patch adds basic target, interface and board support for PIC64GX
Curiosity Kit.
Change-Id: I2234d8725744fbae00b3909773b370e5c18debd8
Signed-off-by: Liam Fletcher <liam.fletcher@microchip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8878
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Microchip's PolarFire SoC has a RISC-V core complex with four
application processors and one monitor processor. This basic
configuration can be used to attach to all proccessor's or a single
processor, specified by the run-time argument $COREID
It can be used with most FTDI based debug interfaces and has been tested
with interface/ftdi/olimex-arm-usb-tiny-h.cfg.
Change-Id: I75dd965f1ce550807706d00fe17de887d36f0b02
Signed-off-by: Liam Fletcher <liam.fletcher@microchip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8877
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We use swd emulation in direct memory operations. Instead of relying
on deprecated autoselect of transport, explicitly state swd as
transport scheme.
Change-Id: Iec7e2ad18edd365992cd7ba88558494bccf49fd2
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8975
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The Orange Pi Zero 3 is an SBC that uses an Allwinner H618
SoC. As such, JTAG support is fully available, however the
SoC multiplexes JTAG function with UART1 and microSD.
Unfortunately Xunlong has used UART1 for the Wifi-BT
chip, leaving JTAG accessible only via the microSD using
a microSD breakout board (for example).
Change-Id: I0dc078cd2f3176815271917eb5e948cc8ef94525
Signed-off-by: Electric Worry <me@electricworry.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The Allwinner H618 is an updated H616 but appears functionally
equivalent. It is used in small boards such as Orange Pi Zero 3.
Change-Id: I299a42be746189f3e8e31070aa26b83ab7d806a4
Signed-off-by: Electric Worry <me@electricworry.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8936
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
raspberrypi.com is the home for technical information, raspberrypi.org
is the Foundation's site (though there are intelligent redirects).
Several pages have moved around, fix these.
Also tweak a few comments for style and correctness.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: I7f52bcc362fb213b50987e3a42866fe4a6fec883
Reviewed-on: https://review.openocd.org/c/openocd/+/8885
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This change adds a polling mechanism to the driver. When not busy
the driver issues a wait, allowing the target to advance time.
The wait period gets adjusted to match the polling setting.
Change-Id: I67f481d05d7c5ce5352b5cb97de78dbaa97d82ae
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8221
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Enable the trace port (GPIOE) clock, otherwise the following pin
configurations have no effect.
Change-Id: I3942d2527c64340463c3b6c607addb4214f83081
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8823
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Board configuration files for specific external debug adapters are not /
no longer supported.
Checkpatch-ignore: LONG_LINE_STRING
Change-Id: I0f391dfb1a2d7ceb92c2ad3e34eaeb8a85b2cdc5
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8865
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add the old configuration files to the 'file_renaming' list in order to
ensure backwards compatibility.
Change-Id: Ia61df8e5cd8c19cee19a494635c8025e36f3f4a7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8907
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move board configuration files into a dedicated vendor directory as
required by the new guideline for configuration files.
Change-Id: Icbf368d7a453c82813e685d2935b186eb738c3ea
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8864
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move target configuration files into a dedicated vendor directory as
required by the new guideline for configuration files.
Note that the moved files are still accessible via the old path to ensure
backwards compatibility. This works because of the extended file search in
vendor folders.
Change-Id: If3935985769dc543e8c7d72cda590c9d79303abb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8905
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The TCL configuration files are going to be dispatched in vendor
specific folders.
Old user configuration files will fail to find the new files to
include, so a set of fallback files reporting the deprecation
should replace the renamed files.
To prevent such enormous proliferation of fallback files, extend
the search of files in the vendor folders too.
For non-trivial renames, a dedicated table is added in the file
tcl/file_renaming.cfg to track old --> new file names.
The deprecated message is then part of the extended search.
E.g.:
old file names:
- path/to/a/certain/vendor_config_file
- path/to/a/certain/vendor-config_file
trigger search of:
- path/to/a/certain/vendor/config_file
and
- path/to/a/certain/config_file
trigger search of:
- path/to/a/certain/${vendor}/config_file
among a possible vendors list.
This is a temporarily feature that should be removed as soon as
possible to prevent clashing on files with the same name.
The names in tcl/file_renaming.cfg are for demonstration purpose
only and should be dropped when the first real entries are added.
Change-Id: If4793fef27dc570d5df4ff4d77a5e36004f394f6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8929
Tested-by: jenkins
The command was already tagged as deprecated in 2015 with commit
0df5577282 ("armv7a: remove l1 flush all data handler") but has
never been removed.
An equivalent command 'cache l2x conf' was introduced at the same
time in commit cd440bd32a ("add armv7a_cache handlers").
Drop it and deprecate it.
Replace the old command in the Tcl script.
Change-Id: Ie24eccc99a78786903704d10ee1d9f6c924529b5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8857
Tested-by: jenkins
Commit 34ec5536c0 ("stlink: deprecate HLA support") makes hard
to use the still functional HLA transport with the stlink listed
in board config files.
Now that the prefixes 'hla_' and 'dapdirect_' has been dropped
from the transport name, allow overriding the transport by using
the 'stlink-hla' script in front of the board file, e.g.:
openocd -f interface/stlink-hla.cfg -f board/st_nucleo_f4.cfg
Revert the documentation changes of the change above.
Improve the documentation to explain how to use the compatibility
HLA mode.
Improve the error message in stlink driver to guide the user to
update the stlink firmware and to use the compatibility HLA mode.
Change-Id: I5d0bc7954511692cebe024bda2aaa72767b97681
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8679
Tested-by: jenkins
Allow flash size override and suppress flash size detection
by setting FLASHSIZE Tcl variable.
reset-init event calls 'connect XIP' ROM API function to make
flash content accessible at the XIP mapping memory area.
Ported from rp2350.cfg
Change-Id: I9b352b1ef6d4c6d4b78a6b61e900ce01355c8eff
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8461
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
While on it use calloc() instead of malloc()/memset()
Drop useless implementation of rp2040_flash_free_driver_priv()
- exactly same as default_flash_free_driver_priv()
Code style fixes forced by checkpatch
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I5c56c4a7d586c0dcab164a45e8f6200ea9a3bd1d
Reviewed-on: https://review.openocd.org/c/openocd/+/8455
Tested-by: jenkins
Also keep size override by FLASHSIZE Tcl variable possible.
Partially backported from former upstream rp2040.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I224c3644450e8b46e35714bfc5436219ffdee563
Reviewed-on: https://review.openocd.org/c/openocd/+/8451
Tested-by: jenkins
A0 chip: remove pad isolation
A2 chip: instead of reset init fixes we will fix the flash driver
with the following patch by Luke Wren:
8729: flash/nor/rp2xxx: fix flash operation after halt in RISC-V bootsel
https://review.openocd.org/c/openocd/+/8729
I don't have A1 version to test.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I9e9fab04ead929fe6e0a17c6c2f32a6f02e9beb9
Reviewed-on: https://review.openocd.org/c/openocd/+/8450
Tested-by: jenkins
RP2350 has 2 slots where either Cortex-M33 or RISC-V can be selected.
Tcl variable USE_CORE selects what cores will be configured for debug.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I56fe1aa94304bdfd1ec98bba57cc3fa792a35f69
Reviewed-on: https://review.openocd.org/c/openocd/+/8449
Tested-by: jenkins
Add support for the Real-Time CPU (RCPU) of K1, which is a 32-bit RISC-V
N308 High-Efficiency Processor Core designed by Nuclei System Technology
Co. Ltd.
The JTAG interface can be configured to connect to either X60s or RCPU
processors. To enable JTAG for RCPU, set TARGET to "rcpu".
For example:
openocd -c "set TARGET rcpu" -f interface/cmsis-dap.cfg \
-f target/spacemit-k1.cfg
Change-Id: I9cd62fac332137afac17efa52702818de8f0b6f5
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-on: https://review.openocd.org/c/openocd/+/8821
Reviewed-by: liangzhen <zhen.liang@spacemit.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add SWD multidrop setting.
Fix the name of AP #1 to AUX-AP
Set AUX-AP CSW Prot bit[0] to make RISC-V debug accessible on AUX-AP.
Change-Id: I496e07acfe90dd858e4403176a8330d8c1a0b560
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8752
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
